dahua firmware ipc-hfw4631h-zsa
- Thread starter Emilianoozi
- Start date
Okay - I uploaded another Chinese firmware and surprisingly even better 
I only have everything in Chinese now. Except that I will do a translation Polish language and re-upload the file already translated and I will have better firmware than it was originally
if anyone also has the same problem with this ipc-hfw4631h-zsa camera then the China firmware is here 下载中心搜索-浙江大华技术股份有限公司
I only have everything in Chinese now. Except that I will do a translation Polish language and re-upload the file already translated and I will have better firmware than it was originally if anyone also has the same problem with this ipc-hfw4631h-zsa camera then the China firmware is here 下载中心搜索-浙江大华技术股份有限公司
Hi,
I followed this tutorial >> Dahua IPC unbricking / recovery over serial UART and TFTP
The camera still works fine and I use it for youtube streaming
I followed this tutorial >> Dahua IPC unbricking / recovery over serial UART and TFTP
The camera still works fine and I use it for youtube streaming
I'm trying to figure out a way to move the description file from one firmware to this Chinese version. I'll let you know if it works .
Also, I tried to extract the .img files within the firmware file to modify the contents but with no luck. Do you have any idea how to deal with these .img files?
. Also, I tried to extract the .img files within the firmware file to modify the contents but with no luck. Do you have any idea how to deal with these .img files?
Hello
I managed to translate the chines description file. However, I could not pack it again to .img file. Can you help?
I managed to translate the chines description file. However, I could not pack it again to .img file. Can you help?
Hi, i have the some problem. Is very easy unpacking only for repack firmware is not easy. By the way I find some script for repack firmware only is some error. If I bypass this fault then I let you know. If you will find first some idea how to repack firmware and will working good please let me know. To repack firmware is problem with sum control, I don't know how to calculate for this firmware.
OK. You don't need to repack the firmware. Just replace the text in the "SimpChinese.txt" file in "custom-x.squashfs.img"
copy the contents of the below attached text file and past to "SimpChinese.txt"
safenote.co
copy the contents of the below attached text file and past to "SimpChinese.txt"
SafeNote | Encrypt and send files and notes with a link that automatically destruct after being read.
Encrypt and send files and notes with a link that automatically destruct after being read to ensure your important documents don’t stay online forever.
safenote.co
Yes, I understand only replace file inside custom-x.squashfs.img need first unpacking this file and after replace packing again and this is ino easy. This file have sum control
Hi,
I replaced this file with what you sent me and I packed the files with this turtial BotoX/Dahua-Firmware-Mod-Kit. If you want, check it. I will be able to check it in a week because now the camera is used for streaming.
Let me know.
I replaced this file with what you sent me and I packed the files with this turtial BotoX/Dahua-Firmware-Mod-Kit. If you want, check it. I will be able to check it in a week because now the camera is used for streaming.
Let me know.
Hello
Unfortunately, the "custom-x.squashfs.img" file failed to be uploaded. I'm using the TFTP method to upload the firmware.
ipcamtalk.com
Unfortunately, the "custom-x.squashfs.img" file failed to be uploaded. I'm using the TFTP method to upload the firmware.
Dahua IPC unbricking / recovery over serial UART and TFTP
Easy recovery without serial: Dahua IPC EASY unbricking / recovery over TFTP Hello, I broke my camera by accident while messing with the firmware and had to recover it. Since I am not the only one that this has happened to and will probably not stay the last one: Here is a simple tutorial on...
