dahua firmware ipc-hfw4631h-zsa

[mark1234]

Hello
Same error message,
Did you try it from your side?

 

[Emilianoozi]

Hi,

I replaced this file, translated what you sent me and zipped the files. It should work fine now. I took the wrong size before and now it's exactly like the original one. If you still need this file, check. It works well for me, only I have Polish

 

[czgif]

Hi,

can you provide me the complete firmware with EN??


thank you Radim

 

[Emilianoozi]

you can download the last file I gave custom-x.squashfs.img.zip there is english

 

[czgif]

OK thanks!
one more question It must upload via telnet, or also works update via the web ??
I ask because the camera is not accessible, and I ladder needed if I must put down.

 

[Emilianoozi]

Hi, you need upload via serial port Dahua IPC unbricking / recovery over serial UART and TFTP

 

[czgif]

OK thanks for your time I'll leave it for spring


BR Radim

 

[czgif]

Hello

maybe you can help me I have this error :
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
Adjust Memory Allocation, dram_size=0x8200000, dsp_ram.start=0x8400000, dsp_ram.size=0x17c00000

here is the whole log :


U-Boot 2010.06-svn4911 (Sep 04 2017 - 11:31:28)
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=130M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net: Detected MACID:bc:32:5f:3f:ec:c1
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC: sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: #################################################
done
Bytes transferred = 378 (17a hex)
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'romfs-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 2871360 (2bd040 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: romfs
Created: 2020-10-10 20:12:54 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2871296 Bytes = 2.7 MiB
Load Address: 01b80000
Entry Point: 01fd0000
Verifying Checksum ... OK
Programing start at: 0x01b80000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'kernel.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 1575024 (180870 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: kernel
Created: 2019-06-19 9:39:52 UTC
Image Type: ARM Linux Firmware (uncompressed)
Data Size: 1574960 Bytes = 1.5 MiB
Load Address: 01040000
Entry Point: 01200000
Verifying Checksum ... OK
Programing start at: 0x01040000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'pd-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 90176 (16040 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: pd
Created: 2020-10-10 20:13:12 UTC
Image Type: ARM Linux Standalone Program (uncompressed)
Data Size: 90112 Bytes = 88 KiB
Load Address: 01880000
Entry Point: 018a0000
Verifying Checksum ... OK
Programing start at: 0x01880000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'user-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 15577152 (edb040 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: user
Created: 2020-10-10 20:13:01 UTC
Image Type: ARM Linux Standalone Program (uncompressed)
Data Size: 15577088 Bytes = 14.9 MiB
Load Address: 000f0000
Entry Point: 01000000
Verifying Checksum ... OK
Programing start at: 0x000f0000
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'web-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 5062720 (4d4040 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: web
Created: 2020-10-10 20:13:10 UTC
Image Type: ARM Linux Standalone Program (uncompressed)
Data Size: 5062656 Bytes = 4.8 MiB
Load Address: 01200000
Entry Point: 01880000
Verifying Checksum ... OK
Programing start at: 0x01200000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'custom-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 73792 (12040 hex)

## Checking Image at 02000000 ...
Legacy image found
Image Name: custom
Created: 2020-10-10 20:13:12 UTC
Image Type: ARM Linux Standalone Program (uncompressed)
Data Size: 73728 Bytes = 72 KiB
Load Address: 018a0000
Entry Point: 01970000
Verifying Checksum ... OK
Programing start at: 0x018a0000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename '.FLASHING_DONE_STOP_TFTP_NOW'.
Download to address: 0x2000000
Downloading: #
done
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
cmdLine console=ttyS0,115200 mem=130M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'success.txt'.
Download to address: 0x2000000
Downloading: *
TFTP error: (0)Erasing SPI flash...
Writing to SPI flash...
done
Support backupVer:255
state:ff,err_count:01
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-3.10.73
Created: 2019-03-06 18:42:53 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1570432 Bytes = 1.5 MiB
Load Address: 00208000
Entry Point: 00208000
Verifying Checksum ... OK
Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
Adjust Memory Allocation, dram_size=0x8200000, dsp_ram.start=0x8400000, dsp_ram.size=0x17c00000
crashflasg:1, logmagic:54410011.


thak you for help

 

[alastairstevenson]

maybe you can help me I have this error :
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
Adjust Memory Allocation, dram_size=0x8200000, dsp_ram.start=0x8400000, dsp_ram.size=0x17c00000

That's not a fatal error - more of a comment.

The flash update looks OK.
What's the end result?
Does the device show in the config tool?

 

[czgif]

No I don't see on coming tool, also Web not working.

Odesláno z mého GM1913 pomocí Tapatalk

 

[czgif]

Hello,
I probably know where is the problem. Problem is bad HWID
on this moment I have this:

HWID: IPC-HFW4631F-ZS-27135:01:02:02:5F:21:00:01:0F:01:00:04:2D0:00:00:00:00:00:01:00:00:200

bad my camera is ipc-hfw4631h-zsa any idea how to fix it the need for proper HWID will someone provide it ??

thank you for help

 

[mark1234]

Hi, you need upload via serial port Dahua IPC unbricking / recovery over serial UART and TFTP

Hello
Thank you for your support
The file ends with ENGLISH extension. I removed it to match the original name "custom-x.squashfs.img" ,but id did not work

 

[arni7]

Cześć,

Wymieniłem ten plik, przetłumaczyłem to, co mi wysłałeś i spakowałem pliki. Teraz powinno działać dobrze. Wcześniej wziąłem niewłaściwy rozmiar, a teraz jest dokładnie taki, jak oryginalny. Jeśli nadal potrzebujesz tego pliku, sprawdź. U mnie działa dobrze, tylko ja mam polski
[/CYTAT]
Czesc czy mozesz wrzucic caly obraz z polskimi plikami ?

 

[asd-123]

Dear all,

any progress on this model regarding the firmware? Do you have the lattest verion in English? Not sure if you solved the issues above.

Thanks a lot.
Martin

 

[asd-123]

My current version:

Device TypeDH-IPC-HFW4631H-ZSA
sys.FirmVersion2.460.0000000.16.R, Build Date: 2017-09-04
WEB Version3.2.1.491565
ONVIF Version16.12(V2.4.0.485616)

 

[Oleglevsha]

My current version:

Device TypeDH-IPC-HFW4631H-ZSA
sys.FirmVersion2.460.0000000.16.R, Build Date: 2017-09-04
WEB Version3.2.1.491565
ONVIF Version16.12(V2.4.0.485616)

This is the latest version of the firmware that was hacked, the following versions have a digital signature