Dahua Intercom Customization? Any ideas?
- Thread starter mgomespt
- Start date
Can anyone help build a soundfile which only rings at the beginning then quiet for 30 sec. I am not that great in hacking firmware and don't want to kill the device.
Concerning the question about the Light on the name tag. You can disable it in the web interface (it is called sensor reduce it and it wont turn on so easy)
Concerning the question about the Light on the name tag. You can disable it in the web interface (it is called sensor reduce it and it wont turn on so easy)
troussillon
n3wb
So changing the ringtone is not possible with the web interface, it's strange no?
Everybody in the world with a dahua VTO as the same ringtone,
Everybody in the world with a dahua VTO as the same ringtone,
riogrande75
Pulling my weight
Well, FW is signed since 2018 - you cannot modify tones easily anymore.
But I found at least a way to install any mp3 file as a ringtone on the VTH's. Read this to understand the "hacking" and then VTO-VTH-konfiguration-%C3%A4ndern-mit-der-dahua-json-debug-console-v2 (sorry, in german only) for the rest.
But I found at least a way to install any mp3 file as a ringtone on the VTH's. Read this to understand the "hacking" and then VTO-VTH-konfiguration-%C3%A4ndern-mit-der-dahua-json-debug-console-v2 (sorry, in german only) for the rest.
troussillon
n3wb
I would like to bring this up again, as I never managed to add new ringtones.
Dahua even added a video tutorial on their site:
dahuawiki.com
I followed this, put the .pcm files I exported with Audacity on a Card (FAT formatted)
in a subfolder called "Ring" but they don't even show up.
Dahua VTH1510 SIP Firmware V4.300
2 GB Card, FAT formatted
Mono ringtone, exported as headerless raw, 8 Bit signed 8 Bit PCM (tried 16 Bit, too)
Has anyone some working ring sounds to share to see if they show up for me?
I can't figure out where the problem is (card size? card format? folder name? file name? file format? etc.)
Dahua even added a video tutorial on their site:
DahuaWiki
dahuawiki.com
I followed this, put the .pcm files I exported with Audacity on a Card (FAT formatted)
in a subfolder called "Ring" but they don't even show up.
Dahua VTH1510 SIP Firmware V4.300
2 GB Card, FAT formatted
Mono ringtone, exported as headerless raw, 8 Bit signed 8 Bit PCM (tried 16 Bit, too)
Has anyone some working ring sounds to share to see if they show up for me?
I can't figure out where the problem is (card size? card format? folder name? file name? file format? etc.)
riogrande75
Pulling my weight
I recall that I played with this some years ago.
Afaik there were problems with the filesize that was too big.
I worked arround this by downloading the files from the device (in fact extracting it from a fw-upgrade image), opening it in audacity and then replacing the audio by something I wanted. This was then saved in the format the original file had.
It's very important that the files remain as tiny as the oringal ones are (only some kb big). So you have to keep quality and length as low as possible.
Afaik there were problems with the filesize that was too big.
I worked arround this by downloading the files from the device (in fact extracting it from a fw-upgrade image), opening it in audacity and then replacing the audio by something I wanted. This was then saved in the format the original file had.
It's very important that the files remain as tiny as the oringal ones are (only some kb big). So you have to keep quality and length as low as possible.
You are right, I forgot to mention my files were below 100 KB. This is the limit according to the video.