Dahua mounting, one like this?

ThomasPI

ThomasPI

Pulling my weight
May 9, 2017
304
212
IMG_2382.JPG Due to the way our new house is laid out and heights of floors and mounting location, when we prewire during the construction we will end up actually placing the mounts on the outside wall of the house. That's ok but I really want a mount bases that offers good adjustments. Is there anywhere I can pickup a Mount similar to this for Dahua cams? Will be on outside walls by corners of house about 9' up off the ground.
 
The Dahua turret and bullet I have can rotate/pan/tilt with mounting provisions.
The Bosch mount shown looks fancy, but seems a bit of overkill to position a camera.
 
Thanks, agreed that mount is obtrusive, I want something that'll give me good adjustability. Once the mount is installed, it's done.
 
With a dahau starlight turret, you loosen one screw, and then it can rotate around. There are some limitations to its movement though, really need to get one and try it.
 
Most of the cameras have mounts that allow you to manually tilt and rotate the camera. So it really depends on the specific model you are looking at. There is a accessory sheet you can look up online at the Dahua website with the different accessory mounts they have for each different camera model.
 
You must log in or register to reply here.
Top Bottom