dahua nvr, how to set up motion detection record??
- Thread starter wozzzzza
- Start date
This thread will probably help with setup and how to get into the camera GUI to set this up:
ipcamtalk.com
***PSA for those with a New DAHUA NVR with Built-in PoE switch
IF you have a Dahua NVR with built-in PoE switch... DO NOT follow instructions telling you to use the config tool or switch the IP of your cameras or initialize anything..! With NVR's typically with a -P designation (Built-n PoE switch - example: 4208-8P-4KS2) none of that is required and it...
bigredfish
Known around here
Setup MD on each camera itself. Don’t try and do it on the NVR. Look under “Events”
bigredfish
Known around here
On the NVR its under "Alarm" see screencaps below.
I still recommend you use IVS which is far superior. And make all setting changes on the cameras themselves, not the NVR.
I still recommend you use IVS which is far superior. And make all setting changes on the cameras themselves, not the NVR.
sweet found it thanks. i will look at ivs, but jsut need movement for mow until i work ivs out
i dont know what im doing wrong here, i have one camera recording movement or something and i cant get any other camera doing movement recording, i have non idea why, ive copied all the settings and not working, it is only recording 24/7 in green, no yellow bars on the time scale.
any ideas what im doing wrong? where do you do the settings? in the camera or in the NVR or both?
any ideas what im doing wrong? where do you do the settings? in the camera or in the NVR or both?
bigredfish
Known around here
bigredfish
Known around here
bigredfish
Known around here
You set up detection area on the camera and check the box to record.
But as the links above show, you have to set up the recording schedule on the NVR
But as the links above show, you have to set up the recording schedule on the NVR