Didn't work for me either, except I can't even edit the overlay page. The channel title options are all greyed out.
Dahua nvr5216-16p-4ks2e defaults random camera names after reboot
- Thread starter Wael
- Start date
Have you tried the newest firmware? NVR5216/5232-16P-4KS2E
DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.3.R.220322
DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.3.R.220322
rianwouters
n3wb
I am using the 4.002.0000000.4.R FW date 29-07-2022 on my NVR 4208.
Still the same problem. Drives me nuts! How difficult can it be to implement a simple CRUD for a name -> channel mapping?
Happens usually after power outage.
Seems this is also written in the log ->
But, looking at the playback, Pääportti doesn't change to Channel1 that time, but Sisä changes to Channel6. Pääportti is IPC-HFW2431T-ZS-S2, Sisä IPC-HDBW2231E-S-S2-0460B.
Seems this is also written in the log ->
| 2023-01-26 08:36:54 | default | Save Config | Saved config. IP:Local Login Username:default Group Name:user Channel:6 Channel Title :Sisä-->Channel6 | |||||||
| 2023-01-26 08:36:50 | default | Save Config | Saved config. IP:Local Login Username:default Group Name:user Channel:1 Channel Title  ääportti-->Channel1 |
But, looking at the playback, Pääportti doesn't change to Channel1 that time, but Sisä changes to Channel6. Pääportti is IPC-HFW2431T-ZS-S2, Sisä IPC-HDBW2231E-S-S2-0460B.
Please state the full model of your NVR. Different NVR’s behave differently even with the same firmware.
This thread was for the nvr5216-16p-4ks2. The most resent firmwares have solved the random camera name changes after reboot for this model.
try this firmware on yours.
(Deleted as it probably is not correct for the NVR mentioned)
Actually here is a newer one.
NVR4108-8P-4KS2/L
As a safety procedure, I always make a config backup then factory default the NVR before firmware update. Then you can just restore your config backup after.
try this firmware on yours.
(Deleted as it probably is not correct for the NVR mentioned)
Actually here is a newer one.
NVR4108-8P-4KS2/L
As a safety procedure, I always make a config backup then factory default the NVR before firmware update. Then you can just restore your config backup after.
Last edited: