Dahua Video Doorbell DB10

EMPIRETECANDY said:
I will send one to @looney2ns for testing
Click to expand...

Seeing other reviews from @looney2ns I'm sure it will be reviewed very good. Having read the not so good experiences by others and since video from the unit will not/cannot be captured (over wifi can't expect to much I guess) on the nvr, probably better idea to have a nice review on the nice intercom kit from Dahua, VTO2000AS - intercom Kit. It comes with a nice screen on which one can watch other cams in and around the house. We'll see after New Year :lol:
 
  • Like
Reactions: EMPIRETECANDY
I had the same issue with db10 battery. It died after 3 days on first charge. That first charge was only 3 hours.

I then charged it for 36 hours, and so far it's been a week with no issues.

I am having issues formatting my microsd card in the unit. I just get a failure message.

The motion detect + push notification works fine. When the doorbell is pressed, I do get a video call from the app. It takes at least 6-8 seconds to connect, and I cannot hear any audio.

Hopefully some of these bugs are fixed soon.

Aside from being unable to format the micro SD, I am also unable to locate the IP address to adjust settings.
 
tangent said:
Honestly I'd just hold out for a VTO3211D-P1 (which doesn't exist yet).
Click to expand...

I guess I have seen a VTO3211D-'P4' (same size as VTO3211D-P2 but four buttons).
So - I guess a version with just button might be coming as well... although it might leave lot of estate uncovered
and Dahua has intercom w/ single button.

Have you checked out: VTO6100C?

INT
 
Last edited:
int said:
I guess I have seen a VTO3211D-'P4' (same size as VTO3211D-P2 but four buttons).
So - I guess a version with just button might be coming as well... although it might leave lot of estate uncovered
and Dahua has intercom w/ single button.

Have you checked out: VTO6100C?

INT
Click to expand...
:lol: read the manual for the VTO3211D-P2 they just killed 2 of the buttons and didn't make holes in the outer case. I think they actually stopped making the P4 version.

The VTO3211* is currently their best door station, it's the only 1080p one. The camera is much better than their others. I hope they release some other models with better cameras this year.
 
Paul M said:
I had the same issue with db10 battery. It died after 3 days on first charge. That first charge was only 3 hours.

I then charged it for 36 hours, and so far it's been a week with no issues.

I am having issues formatting my microsd card in the unit. I just get a failure message.

The motion detect + push notification works fine. When the doorbell is pressed, I do get a video call from the app. It takes at least 6-8 seconds to connect, and I cannot hear any audio.

Hopefully some of these bugs are fixed soon.

Aside from being unable to format the micro SD, I am also unable to locate the IP address to adjust settings.
Click to expand...
As i told Paul to take the battery off and then put back it, this can solve the problem. What is the firmware version on the doorbell? I check if have newer one.
 
I honestly cannot believe how garbage this db10 is.

First, it doesn't show up on any IP scanning tools. Never has.

Two, I disconnected the camera to charge it. After it was charged, it lost connection with Lechange. Since then, I have been unable to add it to lechange or gdmss. It simply cannot be added. I have 5.0 ghz disabled and am following all the instructions. Nothing on my network has changed.

I have requested a replacement device from Andy as I believe this is a defect. It is utterly useless.
 
Paul M said:
I honestly cannot believe how garbage this db10 is.

First, it doesn't show up on any IP scanning tools. Never has.

Two, I disconnected the camera to charge it. After it was charged, it lost connection with Lechange. Since then, I have been unable to add it to lechange or gdmss. It simply cannot be added. I have 5.0 ghz disabled and am following all the instructions. Nothing on my network has changed.

I have requested a replacement device from Andy as I believe this is a defect. It is utterly useless.
Click to expand...

Review-Dahua DB-10 Video Doorbell
 
I've been playing around with the DB10 for a while. Actually I found that it was poor but I did like the concept so thought I'd persevere. I updated the firmware to the latest release and updated the app to IMOU from lechange. I found the speaker to be very low when trying to talk on my phone. I then tested this on an iphone 6, One Plus and a Samsung (I was using an honor) and the speaker worked fine. Obviously this was a small test but it's now not as bad as I previously though.... although I still have a problem using it with my personal phone.

If anyone still has one it might be worth trying to update it and giving it a go again.
 
Tired_Peter said:
I've been playing around with the DB10 for a while. Actually I found that it was poor but I did like the concept so thought I'd persevere. I updated the firmware to the latest release and updated the app to IMOU from lechange. I found the speaker to be very low when trying to talk on my phone. I then tested this on an iphone 6, One Plus and a Samsung (I was using an honor) and the speaker worked fine. Obviously this was a small test but it's now not as bad as I previously though.... although I still have a problem using it with my personal phone.

If anyone still has one it might be worth trying to update it and giving it a go again.
Click to expand...

May I ask, how do you update the firmware?

The doorbell IP does not show up on any IP scanning tools including Dahua ipconfig.
 
You must log in or register to reply here.
Top Bottom