DH-SD1A203T-GN Boot Loop

Low Timer

Young grasshopper
Joined
Nov 12, 2017
Messages
32
Reaction score
6
Good evening. Tonight I made an attempt to update the firmware from 2.622, but failed. I downloaded the firmware bin file and made the attempt through the camera web interface. About a third of the way through, the process stopped and the camera started a boot loop. I unziped the firmware and made the attempt through a TFTP Server. The process works, then fails with the following message:

partition file version 2
rootfstype squashfs root /dev/mtdblock8
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed
cmdLine console=ttyS0,115200 mem=150M root=/dev/mtdblock8 rootfstype=squashfs init=/linuxrc

This is the server messages up until the process fails:

Client 192.168.1.108:3093 root\upgrade_info_7db780a713a4.txt, 1 Blocks Served
Client 192.168.1.108:3224 root\romfs-x.squashfs.img, 973 Blocks Served
Client 192.168.1.108:2562 root\kernel.img, 1178 Blocks Served
Client 192.168.1.108:3127 root\user-x.squashfs.img, 13308 Blocks Served
Client 192.168.1.108:2795 root\web-x.squashfs.img, 3953 Blocks Served
Client 192.168.1.108:2367 root\failed.txt, File not found or No Access

Does anyone have any ideas what I'm missing in the process?

Thanks
 

radionerd

n3wb
Joined
May 15, 2016
Messages
26
Reaction score
13
I'm in a similar boat with a IPC-HFW5231E-Z5E.


This FW works on my SD1A203T-GN
V2.800.0000000.4.R.R4.383, Build Date: 2019-11-05

Have you tried the older firmware too?
 

Low Timer

Young grasshopper
Joined
Nov 12, 2017
Messages
32
Reaction score
6
I'm in a similar boat with a IPC-HFW5231E-Z5E.


This FW works on my SD1A203T-GN
V2.800.0000000.4.R.R4.383, Build Date: 2019-11-05

Have you tried the older firmware too?
I tried this version, may have the wrong one: DH_SD-Mao-Rhea_MultiLang_PN_Stream3_IVS_V2.800.0000000.4.R.191105

Do you have a link to your working firmware?

Thanks
 

Low Timer

Young grasshopper
Joined
Nov 12, 2017
Messages
32
Reaction score
6
Thanks, post #68 is the link I used to download the firmware. I'm getting a failed to update bootargs "dp" not defined cmd failed to run dp. Not sure what I have wrong at the moment.

Thanks again.
 

radionerd

n3wb
Joined
May 15, 2016
Messages
26
Reaction score
13
Andy's dropbox link is 404, looks like the same fw is in the thread.
I see someone else had problems in that thread.

I would remove dp from your command.txt, and run the command batch again. then run again
Also I remember doing an un-brick that delivered some errors. But when I rebooted it worked.
 

Low Timer

Young grasshopper
Joined
Nov 12, 2017
Messages
32
Reaction score
6
Andy's dropbox link is 404, looks like the same fw is in the thread.
I see someone else had problems in that thread.

I would remove dp from your command.txt, and run the command batch again. then run again
Also I remember doing an un-brick that delivered some errors. But when I rebooted it worked.
I removed dp from my command.txt and have recovered the camera, thanks! Thought I had tried removing dp, but evidently I hadn't and appreciate the suggestion.

Did I read correctly V2.800.0000000.4.R.R4.383, Build Date: 2019-11-05 didn't require a plugin to view the video feed? Using Explorer, I'm being prompted to download the webplugin.

Thanks again for the help!
 

Low Timer

Young grasshopper
Joined
Nov 12, 2017
Messages
32
Reaction score
6
You don't need the plugin.
Glad you got it working ;-)
Thanks. For some reason IE downloads a plugin, but it's downloading a plugin for each of the six cameras I have installed with the newer firmware. Other browsers, no plugins are downloaded.

Appreciate the help tonight!
 
Top