Do you turn off camera time overlay?

Jim Pederson

Jim Pederson

Getting the hang of it
Mar 29, 2018
78
89
I noticed BI has built in time overlay, and the cameras all have their own overlay.
Do people using BI sync cameras to an NTP server and use that, or just use the BI overlay. And does BI get time from a NTP or just use system time?
Thanks for any input.
 
If you are recording direct to disk the BI overlays are not included in your video so I just use the camera's overlay. BI uses the system time which can be synced to a NTP time server.
 
Last edited:
  • Like
Reactions: srglassw and TonyR
Thanks all. I found the part of WIKI posts on Optimizing BI. It has all the info I need, save for setting up NTP for each camera. I do not use remote access, but it should be easy.
I would think one just has to specify the time server (say pool.ntp.org), and allow cams to access port 125?
 
Good morning! Guess it should be port 123.
IF you have a Synology nas running it can be a ntp server.
Or blue Iris PC.
Better to have a local ntp and limit camera access outside the lan, to dissconnect all chinese p2p.
Brgds
 
  • Like
Reactions: darrenph1
Was looking at this today and realized how nice the Blue Iris camera names and time overlays look.
Yet the overlays generated from the cameras look like VCR quality from the 80s. Not what I expected from hardware of this resolution.
 
  • Like
Reactions: highyieldceedee
WannaTheater said:
Was looking at this today and realized how nice the Blue Iris camera names and time overlays look.
Yet the overlays generated from the cameras look like VCR quality from the 80s. Not what I expected from hardware of this resolution.
Click to expand...
You must have some weird cameras... as long as you can read the timestamp they are doing their job...
 
My complaint is that the cameras' built in overlays are a bit chunky and cover some useful parts of the images.

While the direct to disk recording can't have the time stamp from BI included in the video, Blue Iris has no problem adding it back in when you play a clip back. So some sort of time code must get stored in BI's files.

I've been tempted to disable all of the camera-generated legends to keep the video clean and uncluttered.
 
J Sigmo said:
My complaint is that the cameras' built in overlays are a bit chunky and cover some useful parts of the images.

While the direct to disk recording can't have the time stamp from BI included in the video, Blue Iris has no problem adding it back in when you play a clip back. So some sort of time code must get stored in BI's files.

I've been tempted to disable all of the camera-generated legends to keep the video clean and uncluttered.
Click to expand...
The problem is that this information is stored in the database, if its corrupted or you delete it, you wont be able to add it back. Furthermore, you have now edited the video after the fact and it may pose some evidentiary issues if it ever came to that...
 
  • Like
Reactions: looney2ns and J Sigmo
I use direct to disk. Even if I didn't, I'd still prefer to have the label and time embedded in the video so it's there even when I'm not viewing them through BI. I also record motion events to the cameras SD cards and want the time there. I also feel like embedding the time in the video stream would hold up better in court if needed.
 
  • Like
Reactions: looney2ns and J Sigmo
fenderman said:
The problem is that this information is stored in the database, if its corrupted or you delete it, you wont be able to add it back. Furthermore, you have now edited the video after the fact and it may pose some evidentiary issues if it ever came to that...
Click to expand...

That's why I've left it turned on for most of my cameras. I just wish you could select a smaller font sometimes. But you do need it to be legible. Whine, moan, bitch! You just can't make us happy no matter how good things are! ;)
 
Last edited:
J Sigmo said:
That's why I've left it turned on for most of my cameras. I just wish you could select a smaller font sometimes. But you do need it to be legible. Whine, moan, bitch! You just can't make us happy no matter how good things are! ;)
Click to expand...

In some of Dahua cams/firmwares you can change the font size and the color of the font.
 
looney2ns said:
In some of Dahua cams/firmwares you can change the font size and the color of the font.
Click to expand...
That would be nice. Or setting it to run vertically up or down one side or the other. I have a couple of cameras where the very top and bottom edges (long edges) happen to be right where I want to see. The time stamp often obscures the very place I want to look, and I don't want to zoom out because then the camera sees a nearby fixed object or edge that screws with the auto exposure.

First world problems, right? ;)
 
J Sigmo said:
That would be nice. Or setting it to run vertically up or down one side or the other. I have a couple of cameras where the very top and bottom edges (long edges) happen to be right where I want to see. The time stamp often obscures the very place I want to look, and I don't want to zoom out because then the camera sees a nearby fixed object or edge that screws with the auto exposure.

First world problems, right? ;)
Click to expand...

They can be moved to a different spot.
 
I didn't see that setting is on my Dahuas. While the overlay is functional and serves its purpose, it is clunky looking. At least to make make it look better than Atari 2600 font. :)
 
looney2ns said:
They can be moved to a different spot.
Click to expand...
That is nice in the 2231 I'm playing with right now. Being able to move it to pretty much anywhere rather than being restricted to just four possible corner locations is handy!

I think I just broke the 2231, however. I was moving it around, and having to "save" every time to see the effect, and now it fails to save. I think I wore it out! ;)

Edit to add: OK, it's working again. Probably a built-in protection to keep me from wearing out the NAND flash that holds the settings!

Playing with Blue Iris, I love all of the adjustments and settings it has for the overlays! But even BI doesn't give me the ability to rotate the legends by 90° so I can have it run vertically along one side or the other. But the settings it does have are extensive and really handy!
 
Last edited:
WannaTheater said:
I didn't see that setting is on my Dahuas. While the overlay is functional and serves its purpose, it is clunky looking. At least to make make it look better than Atari 2600 font. :)
Click to expand...

If it wasn't for losing the direct-to-disk mode, I'd love to just switch off my various cameras' overlays and use only what BI provides because it really does spoil us with all of the adjustments it has. But I can see how asking for that level of sophistication in the actual cameras would be asking a lot! Still, if the manufacturers wanted to add in more capabilities, I'd gladly take them. :)
 
J Sigmo said:
But I can see how asking for that level of sophistication in the actual cameras would be asking a lot!
Click to expand...
Its 2018. Font libraries are abundant, and memory is cheap (although more expensive in the last 24 months). I don't think asking for a 2018 font on a 1080p image is really a huge ask!

That said, I am EXTREMELY pleased with Blue Iris and the image quality on the DW2231R-ZS!!!
 
You must log in or register to reply here.
Top Bottom