Does anyone know how to Factory Reset these Lorex E891AB cameras?

P

ProTapper

Getting the hang of it
Apr 22, 2021
155
68
Dallas, TX
Hi Guys,

Picked up some pre-owned Lorex E891AB cameras. Unfortunately, they did not come factory reset and I don't see a physical button to reset them to access the admin console.

Does anyone know how to Factory Reset them physically before I attempt to return?

Here's the help link that provides no help...

E891AB Series - IP 4K Ultra HD Smart Deterrence IP Camera | LOREX Support

See more and know more with the Lorex 4K Smart Deterrence IP Camera. This camera features advanced person and vehicle detection technology, so you know when someone is at your door or when a vehicle pulls into your driveway with immediate notifications to
help.lorextechnology.com help.lorextechnology.com

Thank you!
 
  • Like
Reactions: mat200
Normally the reset button is nearby the SD card slot.
If can't find it, just ask Lorex support to check for you.
 
  • Like
Reactions: mat200
EMPIRETECANDY said:
Normally the reset button is nearby the SD card slot.
If can't find it, just ask Lorex support to check for you.
Click to expand...
Thank you Andy, there is no SD card slot on these. I wrote an email to Lorex support, but I doubt they'd help me, cause they'll say I didn't buy from their store. They also have a tech support number I'll try to call and see if they help.

In the meanwhile, if you have any other ideas or find something out, asking about these, I'll really appreciate it. Thank you!
 
  • Like
Reactions: mat200
Use a knife to tick this black plastic cover off, the reset button should be at the front of the camera. The mini bullet normally put the reset button before it based on my experience on dahua products.

1642988365714.png
 
  • Like
Reactions: sebastiantombs and mat200
ProTapper said:
Thanks Andy... Are you sure this plate comes off? I don't wanna break it man! :)
Click to expand...

Hi @ProTapper

Search the site for this camera, perhaps other Lorex cameras .. some have modified some cameras to have stronger lenses, and there's a few photos of what he is talking about here iirc.
 
  • Like
Reactions: ProTapper
@EMPIRETECANDY these pictures is what I found under the black plate and then the two screws... Do you see any reset buttons or ways to reset?
 

Attachments

  • 20220123_212734.jpg
    20220123_212734.jpg
    1.8 MB · Views: 84
  • 20220123_212757.jpg
    20220123_212757.jpg
    1.5 MB · Views: 77
  • 20220123_212813.jpg
    20220123_212813.jpg
    1.7 MB · Views: 80
  • Like
Reactions: mat200
ProTapper said:
I know @mat200, believe me I searched before posting... Nothing specific to this camera ..
Click to expand...

Hi @ProTapper

Are you certain??



New Lorex system at Costco - What do you guys think?

I was just in my local Costco and saw they have a new Lorex system they are selling. I picked up a kit to possible replace the Lorex system I got from Costco a year or 2 ago. The system isn't listed on the US Costco website but is on the Canadian one. It was $799.99 plus tax in store...
ipcamtalk.com ipcamtalk.com
 
mat200 said:
Hi @ProTapper

Are you certain??



New Lorex system at Costco - What do you guys think?

I was just in my local Costco and saw they have a new Lorex system they are selling. I picked up a kit to possible replace the Lorex system I got from Costco a year or 2 ago. The system isn't listed on the US Costco website but is on the Canadian one. It was $799.99 plus tax in store...
ipcamtalk.com ipcamtalk.com
Click to expand...
Yes Sir... That thread has me as the last poster... No conclusion :smash:
 
  • Like
Reactions: EMPIRETECANDY and mat200
  • Like
Reactions: ProTapper and EMPIRETECANDY
Hello Friends,

Posting a solution to this in case someone goes through this in the future. So I heard back from the vendor I bought from and spent a half hour on the phone with Lorex support. There are 2 methods to reset:

1. See the attached screen shot for directions. Shout out to my friend @wittaj for having the correct hunch! I will continue to say this, until I quit this board - @wittaj is a treasure we should cherish in this community! He is simply put, Da Man! :D

2. See Lorex's response:

Connect IP Camrea to an Exteral POE switch, which is also connected to a router.
Access your router GUI and check connected devices and look for the camera.

Copy the camera IP address and paste it to the browser address bar,

If you are able to access the log in screen of teh IP camera, Use admin/admin for username and password.

if error, Please call us back to reset the password for the IPC.

We need the " Date and Serial number that shows up on the camera log in screen"
Click to expand...

Thanks and good luck everyone!
 

Attachments

  • Screenshot_20220124-150332_eBay.jpg
    Screenshot_20220124-150332_eBay.jpg
    414.2 KB · Views: 300
  • Like
Reactions: stepsytes and mat200
ProTapper said:
Hello Friends,

Posting a solution to this in case someone goes through this in the future. So I heard back from the vendor I bought from and spent a half hour on the phone with Lorex support. There are 2 methods to reset:

1. See the attached screen shot for directions. Shout out to my friend @wittaj for having the correct hunch! I will continue to say this, until I quit this board - @wittaj is a treasure we should cherish in this community! He is simply put, Da Man! :D

2. See Lorex's response:



Thanks and good luck everyone!
Click to expand...

Thanks @ProTapper , @EMPIRETECANDY , and @wittaj

Good work.
 
  • Like
Reactions: EMPIRETECANDY and ProTapper
You must log in or register to reply here.
Top Bottom