Hello everyone. First of all, Please be generous my poor English.
I use a DS-2CD2032F-I IPC and I've updated the IPC of firmware from 5.3.0_150513 to 5.4.41_170312 yesterday.
After updating The IPC stops working. (=No signal, No IP on SADP but IR LEDs are on)
so I installed the older firmware using TFTP to solve this problem.
and then The IPC appears on SADP. but I can't modify any network parameters. (IP, Port et cetra)
(for example, When I modify IP address from 192.168.1.64 to 192.168.0.100, SADP shows "time out" message.
I just want to use IPC again. But I don't know what I should do.
Please give me some help.
I use a DS-2CD2032F-I IPC and I've updated the IPC of firmware from 5.3.0_150513 to 5.4.41_170312 yesterday.
After updating The IPC stops working. (=No signal, No IP on SADP but IR LEDs are on)
so I installed the older firmware using TFTP to solve this problem.
and then The IPC appears on SADP. but I can't modify any network parameters. (IP, Port et cetra)
(for example, When I modify IP address from 192.168.1.64 to 192.168.0.100, SADP shows "time out" message.
I just want to use IPC again. But I don't know what I should do.
Please give me some help.