DS-2CD2432F-IW integrated PIR NOT recoding to NVR ( GW-804N )

[oldtechy]

Camera: DS-2CD2432F-IW
Firmware: 5.2.5 build 141201

NVR: GW804N (GW Security Inc, ASIN: B00LPJ5V3G)
SYS: 3.4.0.0 build date 2014/06/06

 

[oldtechy]

While using the GW804N NVR {24hr. schedule (MD & Alarm) }...
_ I had no problem recording on "video-motion-alarm/trigger" from the DS-2CD2432F-IW camera;
but when "motion-alarm" is disabled in the camera, nothing gets recorded
even when the other three(3) triggers/alarms appear correctly SET ~!?

Can you assist ( help ?) me in "alarm-recording" when the "DS-2CD2432F-IW" triggers on :

• - PIR-Alarm ( help ?)
• - InstrusionAlarm ( help ?)
• - LineCrossingAlarm ( help ?)

 

[alastairstevenson]

You haven't shown how you have set the recoding schedule up "24hr. schedule (MD & Alarm".
This is for a 7816N-E2 NVR, may be similar on your NVR:

 

[oldtechy]

thanks, yes, the schema is quite similar on GW804N ...
_ which shows 2-colors for MD & Alarm schedule (see images attached)

 

[alastairstevenson]

I tried to find the user manual to see if that dual setting was an 'And' or an ' Or' but no luck.