DS-2CD4332FWD-IZHS questions

[Ecko404]

Got a great deal on a DS-2CD4332FWD-IZHS on ebay.
Looks like the cam is an open box and some parts are missing. Some scratches on the body and dome, but works perfectly.

2 questions:

1- Which firmware is for DS-2CD4332FWD-IZHS? Is that the right one? [ DS-4x12,4x24F,4x32_IP_Camera_Firmware_v5.3.0_150513 ]

2- The 3 screws to screw the dome to the box are missing. Which kind of screws should I try to find?



Thanks!

 

[alastairstevenson]

Depends on the region of your camera - but multiple choices for the same model here : http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Cameras/DS-2CD4XX2,4XX4,6412FWD/
At your own risk ...

 

[Ecko404]

Serial got CCWR in it, everything should be ok with firmware upgrade.
As for the screws, I tested the dome ones, they fit, just need to find out Which type it is so I can search it...

 

[Ecko404]

Update: firmware update to V5.3.5 build 151218 was successful!

Still trying to figure out the tread/size of the screws...

 

[Schmark]

If you have one of the screws (an it looks like you do), go to a hardware store and try to match that screw with what's in the store, for length, diameter, and thread pitch. I suspect they might be metric, so make sure the store carries metric screws.

-S

 

[Ecko404]

If you have one of the screws (an it looks like you do), go to a hardware store and try to match that screw with what's in the store, for length, diameter, and thread pitch. I suspect they might be metric, so make sure the store carries metric screws.

-S

Thx for the tip!

 

[Ecko404]

Went to local hardware store, it is M4 screw. Unfortunately they did not had any, I ordered on ebay...