DS-7608N-E2 Bricked

techcoe

n3wb
Joined
Aug 18, 2021
Messages
3
Reaction score
0
Location
Papeete
Hi,

First sorry for my bad english I'm french.

I put the wrong firmware to an NVR DS-7608N-E2 the firmware is DS-76xxNI-E1(E2)P_USA_Firmware_V3.4.96_181107.
So it boot, beep 15times then reboot.
When I try TFTP update it doesn't find the client.
Server 192.0.0.128
I tried a ping to 192.0.0.64 and it's work.

Any sugestion ?

Thank you,
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,984
Reaction score
6,805
Location
Scotland
So it boot, beep 15times then reboot.
That's the "!!!!!!!you Device is illegal, Please call factory!!!!!!" complaint when EN firmware is applied to a CN NVR.

If the NVR is old enough that the hardware descriptor block in the flash memory that holds the language info is still in plaintext, you should be able to convert to EN with this method :
 

techcoe

n3wb
Joined
Aug 18, 2021
Messages
3
Reaction score
0
Location
Papeete
That's the "!!!!!!!you Device is illegal, Please call factory!!!!!!" complaint when EN firmware is applied to a CN NVR.

If the NVR is old enough that the hardware descriptor block in the flash memory that holds the language info is still in plaintext, you should be able to convert to EN with this method :
Awright so, I was scared it was the only solution. So I have to find this convertor, not easy.
Thankyou
 

techcoe

n3wb
Joined
Aug 18, 2021
Messages
3
Reaction score
0
Location
Papeete
The serial TTL to USB convertor?
Search eBay or similar for PL2303TA
And for the wired connector -
Search eBay or similar for "ZH 4-pin 1.5mm JST wired connector"
Yes thank you. just some troubles to be dellivered here and no ones sell it on my island.

Thank you for your help.
 
Top