DS-7608NI-SE/P V3.0.22. New cam not work

Discussion in 'NVR's, DVR's & Computers' started by osamielec, Jun 25, 2019.

Share This Page

  1. osamielec

    osamielec n3wb

    Joined:
    Sep 3, 2015
    Messages:
    24
    Likes Received:
    2
    Welcome. Is NVR DS-7608NI-SE / P no longer available on europe upload hikvision software?
    I can not find. I have in the V3.0.22 recorder. Build 170621 and does not see me a new camera DS-2CD2142FWD-I V5.5.5. 180111 (despite the fact that it is added manually - ip camera login and password). Is this recorder no longer supporting new cameras for me?
     

    Attached Files:

    • ee.jpg
      ee.jpg
      File size:
      442 KB
      Views:
      8
  2. alastairstevenson

    alastairstevenson Staff Member

    Joined:
    Oct 28, 2014
    Messages:
    11,099
    Likes Received:
    3,507
    Location:
    Scotland
    In the 'phased out' section - the same firmware as you already have : DOWNLOAD EU PORTAL
    And the same here : ftp://ftp.hikvision.ru/01.%20%D0%A0%D0%B5%D0%B3%D0%B8%D1%81%D1%82%D1%80%D0%B0%D1%82%D0%BE%D1%80%D1%8B/05.%20DS-76XXNI-SE/

    Is the camera connected to the LAN, and not to the NVR PoE port?
    The IP address suggests that.
     
  3. osamielec

    osamielec n3wb

    Joined:
    Sep 3, 2015
    Messages:
    24
    Likes Received:
    2
    The camera is connected to the Poe port.
     
  4. alastairstevenson

    alastairstevenson Staff Member

    Joined:
    Oct 28, 2014
    Messages:
    11,099
    Likes Received:
    3,507
    Location:
    Scotland
    In which case the camera IP address is incorrect.
    Check the IP address assigned to the NVR PoE channel you want to connect the camera to, and change the camera IP address to match it.