Finding a way to turn alerts on and off

bigbillsd

Young grasshopper
Joined
Aug 6, 2018
Messages
33
Reaction score
4
Location
Pearl Harbor
Hi, I looked at the schedules feature of v4 that I own and it looks like that is just for turning cameras on an off. I like to record all the cameras 7x24 but would like to either schedule the alerts on or off or find an easier to way to manually do it. When I am home or during the day I really don't need lots of texts and emails going out. Any other way to do this without going into the properties of each camera and either checking or unchecking the a type of alert under the tab.

Thanks, Bill
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
4,338
Reaction score
4,143
Location
Alabama
You could create 2 profiles, one in which the alerts are enabled, one where they are not.
If you want the 2 profiles to be controlled by time, then create a schedule to enable/disable the above profiles.

Below is pages 93 thru 97 of the Help for BI v5 that details this.
 

Attachments

Last edited:

bigbillsd

Young grasshopper
Joined
Aug 6, 2018
Messages
33
Reaction score
4
Location
Pearl Harbor
You could create 2 profiles, one in which the alerts are enabled, one where they are not.
If want the 2 profiles to be controlled by time, then create a schedule to enable/disable the above profiles. Below is pages 93 thru 97 of the Help for BI v5 that details this.
Thanks! Tony, I think that will work for what I want to do. -Bill
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
31,277
Reaction score
10,237
Another way to do it is to use the shield icon(old traffic light) and only set it to disable alerts (blue iris options >other) This wont allow a schedule like using profiles would.
 
Top