Hi
Everything was fine on my LAN with 12 dahua IP cameras and symmetricalGigabit with a Fios ONT modem and my gigabit netgear router
Yesterday I got there TV service and they put their Fios G3100 router in.
My netgear with got bumped to second position with the lan port from the 3100 going to the wan port of my netgear
I had to change the 3100 lan from its default 192.168.1.1 to 192.168.0.1 so my netgear and all the LAN IP camera would play nice
The problem is this:
My remote cameras all show up IN BI but not the lan cameras. I always use the WAN IP as the address.
I tested using 192.168.1.25:1544 and it populated but now with the WAN
But If I am at my upstate house using BI, would I see these cameras?
I use port forwarding on the netgear but since the netgear is in second position does port forwarding still work?
Any help appreciated
Everything was fine on my LAN with 12 dahua IP cameras and symmetricalGigabit with a Fios ONT modem and my gigabit netgear router
Yesterday I got there TV service and they put their Fios G3100 router in.
My netgear with got bumped to second position with the lan port from the 3100 going to the wan port of my netgear
I had to change the 3100 lan from its default 192.168.1.1 to 192.168.0.1 so my netgear and all the LAN IP camera would play nice
The problem is this:
My remote cameras all show up IN BI but not the lan cameras. I always use the WAN IP as the address.
I tested using 192.168.1.25:1544 and it populated but now with the WAN
But If I am at my upstate house using BI, would I see these cameras?
I use port forwarding on the netgear but since the netgear is in second position does port forwarding still work?
Any help appreciated