Forgot the io address I changed my cameras to - how to find?

[jayleoness]

Have some dahlia cameras and have them loaded into blue iris. Forgot what I changed them to though for when I want to access thru the browser. How would I find out? I have the second NIC and I have them on that I know

 

[SouthernYankee]

You will only be able to access the cameras from the BlueIris computer id they are on the second nic.

If the cameras are up and running in BI, then the IP address of the camera is in the camera properties in BI on the video tab.

 

[Sonomascanner]

You can install the dahua config tool on the computer with the second nic and let it scan

 

[cage771]

You can run Wireshark on that network and see the traffic from any/all IPs on it. A port sniffer program will allow you to obtain a list of every IP and their open ports on a given network.

Of course, you can always log into your router and look at the table as well.

Looking in BI might help, but I recently had an issue where either the camera or BI reverted back to an old IP. Not sure what happened with that but using the manufacturers software, I was able to identify the camera and IP.