Improvements:
Old firmware
- Enhanced and secured usage of the Foscam DDNS.
- Firstly determine which camera model (e.g., FI8918W) and which firmware version currently exists on your MJPEG camera by checking under Settings > Device Status. You are looking for the "Device Firmware Version"
- Download the latest firmware version 11.xx.2.59 below based on your camera model:
FI8910W - Download latest MJPEG indoor pan/tilt firmware now
FI8916W - Download latest MJPEG indoor pan/tilt firmware now
FI8918W - Download latest MJPEG indoor pan/tilt firmware now
FI8903W - Download latest MJPEG outdoor bullet firmware now
FI8904W - Download latest MJPEG outdoor bullet firmware now
FI8905W - Download latest MJPEG outdoor bullet firmware now
FI8906W - Download latest MJPEG outdoor bullet firmware now
FI8919W - Download latest MJPEG outdoor pan/tilt firmware now
FI8907W - Download latest MJPEG indoor fixed camera firmware now
FI8909W - Download latest MJPEG indoor fixed camera firmware now
Click here for an alternative download link via third-party mirror (Dropbox)
Please follow the instructions contained in "How to upgrade firmware for MJPG.pdf" included in each download. Failure to install the firmware correctly could result in bricking your camera. If you are unsure on how to proceed, please stop immediately and contact us. Please note that this firmware update is for the camera models mentioned above only. If you are not sure which camera you have, stop immediately and contact us.
Old firmware
Foscam released a firmware update today for the FI8918W. It addresses the following issues:
The procedure for upgrading to the latest version is as follows
- Addresses a bug that allowed the use of certain CGI commands without proper authorization;
- Disallows the use of blank spaces in login username ;
- Allows the use of special characters in login password.
The procedure for upgrading to the latest version is as follows
- Firstly determine which firmware version currently exists on your FI8918W by checking under Settings > Device Status. You are looking for the "Device Firmware Version"
- If you have Device Firmware Version 11.37.2.XX proceed to download and install the latest version 11.37.2.55 here
- If you have Device Firmware Version 11.22.2.XX proceed to download and install the latest version 11.22.2.51 here
- Please follow carefully the instructions contained in "How to upgrade firmware for MJPG indoor PT camera.pdf" included in each download. Failure to install the firmware correctly could result in bricking your camera. If you are unsure on how to proceed, please stop and post here!