Geovision UNP2500 Pin Hole Camera and Blue Iris

[owenmpk]

Hello Gang,
I have a need to use a Geovision UNP2500 Pin Hole camera and wondering if anyone has any experiance with this device and BI? I do not see it listed in the tested cameras so i am reaching out to the Collective.

Owen k

 

[fenderman]

Hello Gang,
I have a need to use a Geovision UNP2500 Pin Hole camera and wondering if anyone has any experiance with this device and BI? I do not see it listed in the tested cameras so i am reaching out to the Collective.

Owen k

Should work with one of the geovision options. Blue iris will support any camera with an rtsp stream or onvif.
That is a very good design for true in wall mounting of a pinhole camera.
https://www.ipcamtalk.com/showthread.php/4099-How-to-add-camera-to-BI-that-is-not-in-the-drop-down-list

 

[owenmpk]

Should work with one of the geovision options. Blue iris will support any camera with an rtsp stream or onvif.
That is a very good design for true in wall mounting of a pinhole camera.
https://www.ipcamtalk.com/showthread.php/4099-How-to-add-camera-to-BI-that-is-not-in-the-drop-down-list

Hello Gang,
I setup the GV-UNP2500 today and selected Make as Generic and Model RTSP H.264/MJPG/MPEG4 and then the find/inspect set the Path to /CH001.sdp and it was picked up and working fine.
Below is a screen capture