Good day,
I've setup a completely wireless cctv system with 8 wireless cameras (all cameras have just power ports with no physical LAN ports). 5 of these cameras are connected to the wireless NVR and are working fine but 3 cameras are out of the NVR's wifi range.
I tried connecting thses 3 cameras through my tp-link Tl-Mr3420 wireless router as a bridge to the wireless NVR but they all seem not to communicate with themselves and I think there's something I have gotten right andI need your help.
Below are my present settings:
The NVR has two different ip addresses:
a. Basic:
Network: (static ip)
ip address: 192.168.0.110,
subnet: 255:255:255:0
gateway: 192.168.0.1
b. Network status:
ip status: 172.20.18.3
gateway status: 172.20.18.1
DNS1 status: 172.20.18.1(connected)
Network status: Ethernet connected
Network speed: 100Mbps
The 5 working ip cams:
ip addresses are 172.20.18.12 to 172.20.18.16 range. Static ip
The 3 not working ip cams:
ip addresses are 172.20.18.17 to 172.20.18.19 range. Static ip
The Tp-link TL-MR3240 (router)
Default
Ip address: 192.168.0.24
gateway: 192.168.0.1
Subnet: 255.255.255.0
I've changed the routers to:
ip address: 172.20.18.2
gateway: 172.20.18.1
submask: 225.225.225.0
and DHCP: off
Thanks
I've setup a completely wireless cctv system with 8 wireless cameras (all cameras have just power ports with no physical LAN ports). 5 of these cameras are connected to the wireless NVR and are working fine but 3 cameras are out of the NVR's wifi range.
I tried connecting thses 3 cameras through my tp-link Tl-Mr3420 wireless router as a bridge to the wireless NVR but they all seem not to communicate with themselves and I think there's something I have gotten right andI need your help.
Below are my present settings:
The NVR has two different ip addresses:
a. Basic:
Network: (static ip)
ip address: 192.168.0.110,
subnet: 255:255:255:0
gateway: 192.168.0.1
b. Network status:
ip status: 172.20.18.3
gateway status: 172.20.18.1
DNS1 status: 172.20.18.1(connected)
Network status: Ethernet connected
Network speed: 100Mbps
The 5 working ip cams:
ip addresses are 172.20.18.12 to 172.20.18.16 range. Static ip
The 3 not working ip cams:
ip addresses are 172.20.18.17 to 172.20.18.19 range. Static ip
The Tp-link TL-MR3240 (router)
Default
Ip address: 192.168.0.24
gateway: 192.168.0.1
Subnet: 255.255.255.0
I've changed the routers to:
ip address: 172.20.18.2
gateway: 172.20.18.1
submask: 225.225.225.0
and DHCP: off
Thanks