2- Plug in your cameras to the NVR. Dont do anything else. The beauty of a PoE NVR is you dont have to do a damn thing, just plug them in, dont go clicking on buttons and shit when you dont know what youre doing, It WILL F$@k things up.
*Dont try to manually add them or force them to the bottom pane. Wait. Sometimes it takes a bit.
3 Open a browser on a PC on your network (again assuming a standard home network of 192.168.1.x) and type 192.168.1.108 or the IP you changed it to, and hit Enter. You will go to the WebGUI interface of your NVR. This is how you will manage your NVR from now on. Login with the name and pass you assigned the NVR
4- Assuming the newer 4.0 dark interface, Choose "Management" at top left then "Camera". This will take you to a page (Registration) that looks like the thumbnail below. The NVR will have automagically assigned each camera a channel and an IP address in the 10.1.1.x range** and a port of 1,2,3 etc.. You can NOT access the cameras without going through the NVR interface and using the Blue IE icons. See thumbnail below. (well you can access them but its a PIA and not necessary)
5- Click on the BLUE IE icon to open the individual cameras Web GUI to make changes to your camera settings, IVS, etc. The login for each new camera will default to Admin/your NVR password
The Login and Password for each camera will be identical and the same as your NVR. Dont F$@K with them!
*On initial login/setup for the cameras, DO NOT enable P2P in the popup that asks you this. Uncheck that along with Auto updates.