Help identifying generic nvr board

Discussion in 'NVR's, DVR's & Computers' started by xavier00, Oct 11, 2016.

Share This Page

  1. xavier00

    xavier00 Getting the hang of it

    Joined:
    Jul 31, 2016
    Messages:
    103
    Likes Received:
    1
    I would like to know if someone can tellme what board is this? I just want to find the right firmware
    for it image.jpeg i thought it was a nbd- 7808tbut it seems its not, firmware wont work
     
  2. alastairstevenson

    alastairstevenson Staff Member

    Joined:
    Oct 28, 2014
    Messages:
    11,103
    Likes Received:
    3,507
    Location:
    Scotland
    It looks like the serial console port may be the 4 connector holes, just left of D26? in the centre of the board.
    If you connect a USB to TTL serial convertor, you may get access to the bootloader or kernel and get some useful information.
     
    xavier00 likes this.
  3. xavier00

    xavier00 Getting the hang of it

    Joined:
    Jul 31, 2016
    Messages:
    103
    Likes Received:
    1
    image.jpeg image.jpeg image.jpeg image.jpeg I took the bo image.jpeg image.jpeg image.jpeg image.jpeg off,any clues????
     
  4. xavier00

    xavier00 Getting the hang of it

    Joined:
    Jul 31, 2016
    Messages:
    103
    Likes Received:
    1
    This is the mistery board being sold all over the place, no brand no firmware no help from sellers
     
  5. xavier00

    xavier00 Getting the hang of it

    Joined:
    Jul 31, 2016
    Messages:
    103
    Likes Received:
    1
    Outside they all look like this H.264 onvif p2p 8ch model NVR-1008
    image.jpeg
     
  6. nayr

    nayr IPCT Contributor

    Joined:
    Jul 16, 2014
    Messages:
    9,347
    Likes Received:
    5,242
    Location:
    Denver, CO
    it looks like a Chinese made brick to me.
     
  7. alastairstevenson

    alastairstevenson Staff Member

    Joined:
    Oct 28, 2014
    Messages:
    11,103
    Likes Received:
    3,507
    Location:
    Scotland
    I presume you saw the above, on this post:
    https://www.ipcamtalk.com/showthrea...owsoo-branded)?p=131423&viewfull=1#post131423
    This is easy enough to do: