Help with Scheduling Profile Changes

[rynh]

Hey there, I'm scratching my head on how to add a 'condition' to scheduling...

Basically I want my system in profile 1 evenings and weekends.
In profile 2 weekdays

However, if I set the system in profile 3 or 4 it ignores schedule and stays put.


Appreciate any help you guys are willing to give.

 

[wittaj]

Post screenshots of the timeline of each profile 1 thru 4.

 

[rynh]

Here's what I have so far... but I'm assuming it would just switch back to green or blue profile once the next schedule item hits regardless of what profile is manually set.

 

[wittaj]

Check here and make sure you don't have something conflicting:

 

[rynh]

Here's mine:

 

[wittaj]

The 0 temp time means it will stay on profile 3 or 4 until you manually switch it to a profile with a schedule.

 

[rynh]

OK thanks. So having 0 temp time on profiles 1, 2 where i have a schedule will still work?

 

[wittaj]

That is correct!

 

[fenderman]

There is also a hold feature. Selecting the profile you want then holding the pause button will result in a red square which will hold the profile until you manually change it. This will allow you to use the temp function as well when you need to.