Hik thrmal camera - setting up "motion alerts"

[daveqrj]

I have this camera: DS-2TD2617-3/V1

I finally managed to make the web interface work using Internet Explorer, and have added it to the HIK connect app.

I would now like to set up so that I get a notification/alarm on the app if the thermal camera picks up something, and then make it record both the thermal feed and the normal video feed to the SD card.

I am aware that I need to configure it using the web interface. Can you guide me how to do that?

So far I managed to log the event with a picrure from the thermal cam when the thermal camera sees movement within a defined area, but no video is recorded from either the thermal or normal feed.

Also Is there a setting somewhere to turn the web user interface into English? Then I can post some screenshots of the settings.

 

[trempa92]

To be recorded you either need SD card or NVR. Do you have any of those 2?

 

[daveqrj]

To be recorded you either need SD card or NVR. Do you have any of those 2?

Yes, I have a SD card mounted into the camera and have initialized it so that it shows up with status 'normal'

 

[daveqrj]

@trempa92 can you help?

 

[trempa92]

For each event, to be recorded on sd card there is option in Linkage, Save to NAS/FTP/Memory card. That has to be ticked

 

[daveqrj]

For each event, to be recorded on sd card there is option in Linkage, Save to NAS/FTP/Memory card. That has to be ticked

Thanks for the reply!
For camera 2, which is the thermal lens, I have the following settings ticked - see images (the text is ai translated into English, since my user interface is another language and I do not know how to set it to English).

With these settings I get saved a screenshot from the thermal stream that I can see on the app.

But what I would like to do is that when the thermal lens picks up something, I want to save a short video from the normal lens that I can watch on the HIK Vision app.

How can I set that up?