Hikvision 2CD2732F-IS Wall Mount Install

[gswimfrk]

Been lurking around the forum for a month and was able to successfully install a few cameras on my own home thanks to everyone' tips and tricks. Thought I'd post a pic.
I'm using the Hikvision 2CD2732F-IS + WMS w/Junction Box + PC135 Pendant Cap. And I used LFMC of course. Any suggestions, questions, or comments are welcome!


If anyone knows any good sources for security screws, let me know! Would like some 6-32 screws for securing those blank plates, just for fun- doubt anyone would tamper with them at 14 ft high.

 

[fbnoise]

Install looks great! I don't know of any go-to places (someone else here might), but I'd start with a search on Amazon for "stainless security screws"

 

[fenderman]

At that height the security screws will only cause hassle for you in the future.

 

[blake]

Great job on the install. EMT looks much more professional than pvc.

 

[gswimfrk]

Thanks guys! I am so against using PVC tubing, it tends to get crunchy in the Texas sun after a few years and this is a narrow driveway. I was hoping to fish the cat 5e through the walls but this house is 90+ years old and still has the concrete+chicken wire "plaster" inside and I'd hate to cut holes in that.

 

[blake]

3/4 or 1/2 inch emt?

 

[gswimfrk]

1/2" EMT, LFMC, and Junction Box. It seems that all Hikvision products are 3/4" NPT so I used a 3/4" to 1/2" NPT reducer on the WMS Junction Box to a 1/2" LFMC connector.

 

[pal251]

I've used the same conduit with good success in Kansas. I'd wouldn't worry

 

[gswimfrk]

Finally got a chance to take some more selected pictures, apologies for the Potato quality and weird angles.

 

[gswimfrk]

Here are some more selected pictures, I guess I cannot upload in a huge batch. Anyone know the upload file size limitation?