Hello,
my hivision camera was in operation by an static ip-adress (the web access functioned)
After a network change there is a new ip v4 subnet.
So i tried to change the cam-ip-adress for the new subnet. At first i connected the camera diretly to a laptop (different ip but same subnet). -> I had no web access.
The network access to the cam was only possible, if i used the hikvision tool "SADP". By this tool i changed the cam-ip-settings to "DHCP" and activated "DHCP also at the router. In the router network overview, i see the hikvision cam with a new assigned ip-adress. But if i enter the new ip-adress into the browser, i dont get access anymore. WHY?
Does anyone have an idea?
THX
Marius
my hivision camera was in operation by an static ip-adress (the web access functioned)
After a network change there is a new ip v4 subnet.
So i tried to change the cam-ip-adress for the new subnet. At first i connected the camera diretly to a laptop (different ip but same subnet). -> I had no web access.
The network access to the cam was only possible, if i used the hikvision tool "SADP". By this tool i changed the cam-ip-settings to "DHCP" and activated "DHCP also at the router. In the router network overview, i see the hikvision cam with a new assigned ip-adress. But if i enter the new ip-adress into the browser, i dont get access anymore. WHY?
Does anyone have an idea?
THX
Marius