Hikvision DS-2CD2355F-I install & wall mount

Dimitris19

n3wb
Joined
Jun 15, 2015
Messages
5
Reaction score
0
Hello, i have just received this new turret model, with sd card and build in mic, but it's a bit different from the other turret models(like ds-2cd2332-i for example).
First of all it's not the same size. The new one is 93.2 x 123.3 vs (97.5x127). So, i need a wall mount but i don't know which one is compatible.
Also, i don't understand how to remove the plastic cover to install the camera.(see the photo below).

If anyone could help
Thanks in advance!
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,963
Reaction score
6,794
Location
Scotland
Check out the 3 ramped sections near the outer edge. These hold the outer ring, when clicked in position.
To take it apart - put your fingers in the inside rectangular holes underneath, and turn the outer ring anti-clockwise, gripping gently at the serrations on the outside, trying not to squeeze.
 

Dimitris19

n3wb
Joined
Jun 15, 2015
Messages
5
Reaction score
0
Ok, that was easier than i thought. Thank you so much! :)

Now i need a wall mount but i don't know which one is compatible with this model

@Jack B Nimble


SD card slot

 
Top