HIKVISION DS-7604NI-E1/4P Repeat the restart

[nobuaki0120]

Hello
As a result of updating the firmware from 3.3.2 to 3.3.4 , it will repeat the restart continues sounding for 15 seconds beep after the title screen appears .
Why not remedy ?

 

[rommycam]

Your NVR is brick.
Recover:
Using only Hikvision tftp server tool to recover by dowgrading to 3.3.2

Hikvision tftp explain here:
http://www.hikvision.com/UploadFile/File/201433116851896.pdf

Download from here
http://www.hikvision.com/europe/down...re.asp?id=1336


Usefuls informations read theses posts :

http://www.ipcamtalk.com/showthread.php/692-What-is-the-de-bricking-process-for-HIKVision-camera-and-NVR-firmware-updates?highlight=192.0.0.64

http://www.ipcamtalk.com/showthread.php/4760-Hikvision-DS-7616NI-SP-Firmware-issue

 

[nobuaki0120]

Thanks!
It was repaired!
This post was　very helpful!
http://www.ipcamtalk.com/showthread.php/4760-Hikvision-DS-7616NI-SP-Firmware-issue

 

[rommycam]

Thanks!
It was repaired!
This post was　very helpful!
http://www.ipcamtalk.com/showthread.php/4760-Hikvision-DS-7616NI-SP-Firmware-issue

Congratulations good job.
Must appreciates: there is a thank button if you find the post helpful.after

 

[wzhick]

It is not a brick. this is normal.

 

[rommycam]

It is not a brick. this is normal.

Yes wzhik, you are absolutely right, it's a kind of "corrupt firmware" or "incompatible code".
Important is device still can be recover.

I would like to thank you for useful and friendly helpful contribution, I had learn a lot from.

 

[badmana]

Your NVR is brick.
Download from here
http://www.hikvision.com/europe/down...re.asp?id=1336

Does anyone have this software available other than from HIKVISION? I have searched both their sites (overseas and europe) and they both do not have the TFTP software.

 

[alastairstevenson]

Hikvision do appear to have removed the download availability of the Hikvision-specific tftp updater, across all sites. @Stevejn - can you confirm that this removal is part of a deliberate policy and not simply an omission during the website update?
It would be helpful if you could share the purpose behind no longer providing this tool.
What can you tell us about future plans to remove self-help facilities such as firmware update?

Many thanks.

 

[Stevejn]

Evening Alistair - not that I am aware of. I will need to check with tech support. Firmware update and various other tools are available on the portal.