Hikvision DS-7608N-E2/8P at Firmware 3.0.10

Joined
Jul 28, 2015
Messages
14
Reaction score
0
Greetings,

Wonderful forum!!!!

I have the aforementioned NVR up and running. It came from China already set up for English.

The problem I having is that it will only record video from certain model cameras (They are all Hik). I was told that a firmware update would solve this. Reading through here, I see that a FW update is not necessarily a walk in the park.

Please advise or point me toward info on how to safely update this machine.

Thanks!
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,980
Reaction score
6,802
Location
Scotland
I've had no problem adding a wide variety of cameras using the 'Custom Protocol' facilities of Camera Management, 7816 with 3.0.8 firmware.
Is that what you've been trying, does it exist on your NVR with the current firmware?
 
Joined
Jul 28, 2015
Messages
14
Reaction score
0
I didn't describe the problem very well.

The problem is that the NVR will not record motion events from some models of Hikvision cameras.

It seems to me that the triggers for motion are generated in the cameras. The cameras then tell the NVR that there is motion. It is in that communication where I believe that the problem exists.
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,980
Reaction score
6,802
Location
Scotland
motion events from some models of Hikvision cameras
OK, what specific cameras work and which do not?
It seems to me that the triggers for motion are generated in the cameras.
Yes, that is correct.

Are all the camera motion detection and schedule recording set up in the same way?
Have you checked the NVR logs for motion events?
 

geek7899

Young grasshopper
Joined
Jul 1, 2015
Messages
93
Reaction score
6

Attachments

Top