Hello All,
I'm a newbie but technically inclined and hoping to get some suggestions. I cracked opened my NVR today, plugged in a Hikvision camera 2CD2132 (firmware version 5.2), and got a LiveView feed from said camera (from NVR GUI). Being a new NVR, I looked for the latest NVR firmware to update and found the USA firmware on Hikvision.com (I think this was my first mistake). I bought the NVR from eBay but it did display with English when I first got into the web GUI but I forgot to check the firmware version before updating. If I log into the camera itself, I am able to see the live feed. If I try to view it through the NVR GUI, I do not see the live feed after the firmware update.
I'm running:
* Firmware version: V2 3.10 build 141128
* Encoding version: V1.0 build 140701
Camera is plugged into the NVR through one of the PoE ports.
I'm a newbie but technically inclined and hoping to get some suggestions. I cracked opened my NVR today, plugged in a Hikvision camera 2CD2132 (firmware version 5.2), and got a LiveView feed from said camera (from NVR GUI). Being a new NVR, I looked for the latest NVR firmware to update and found the USA firmware on Hikvision.com (I think this was my first mistake). I bought the NVR from eBay but it did display with English when I first got into the web GUI but I forgot to check the firmware version before updating. If I log into the camera itself, I am able to see the live feed. If I try to view it through the NVR GUI, I do not see the live feed after the firmware update.
I'm running:
* Firmware version: V2 3.10 build 141128
* Encoding version: V1.0 build 140701
Camera is plugged into the NVR through one of the PoE ports.
Last edited by a moderator: