Hi All,
installed a update (NVR_K41_BL_ML_STD_V3.4.90_161008) over the original English hack firmware V3.3.4, build 150616.
Did this via usb directly to the NVR. Now I get the dreaded 12beeps and reset loop happening. I get a logo pop up on the screen when this happens (not the 'warning you have Chinese product....")
I have tried putty and tftp with no luck. Have also given my unit to a Hikvision tech here and they couldn't use either putty or tftp to get it to work either.
These were the products I was using for putty. It didn't work for me, but may have the wrong products?
USB to DB9M RS-232 Converter, 1.5m | Jaycar Electronics
DB9 Female IDC Connector | Jaycar Electronics
The tech I gave it to recommended a new unit, but don't really have the money to replace. Do you think the unit is saveable? If someone is local that would be fantastic, would be happy to pay for your time
Perth, Australia
Thanks
installed a update (NVR_K41_BL_ML_STD_V3.4.90_161008) over the original English hack firmware V3.3.4, build 150616.
Did this via usb directly to the NVR. Now I get the dreaded 12beeps and reset loop happening. I get a logo pop up on the screen when this happens (not the 'warning you have Chinese product....")
I have tried putty and tftp with no luck. Have also given my unit to a Hikvision tech here and they couldn't use either putty or tftp to get it to work either.
These were the products I was using for putty. It didn't work for me, but may have the wrong products?
USB to DB9M RS-232 Converter, 1.5m | Jaycar Electronics
DB9 Female IDC Connector | Jaycar Electronics
The tech I gave it to recommended a new unit, but don't really have the money to replace. Do you think the unit is saveable? If someone is local that would be fantastic, would be happy to pay for your time
Perth, Australia
Thanks