i tried the reset tool, its the same codes that hikvision support gave me. I get a green check mark saying the password has been changed, but i still cant change parameters (enabling dhcp, hik connect, ip address or any of the ports). it seems like my only option is to use the unbricking tool
Hikvision is camera not communicating with nvr
- Thread starter Byousefz
- Start date
hi everyone,
i was able to flash all the cameras with the TFTP server easily. i ended up connecting the PC to a poe switch to the cameras. it wouldn't work with the poe injector for some reason. i also set the local ip to 192.0.0.128. thanks everyone for the help, hope this helps out other people as well
i was able to flash all the cameras with the TFTP server easily. i ended up connecting the PC to a poe switch to the cameras. it wouldn't work with the poe injector for some reason. i also set the local ip to 192.0.0.128. thanks everyone for the help, hope this helps out other people as well
Byousefz thanks for the information, so a POE injector needs to be used with a ethernet hub or switch.
I'll look into ethernet cables as I'm sure that there's a type that can be used to connect two devices directly without an ethernet hub or switch, but as unusual when you really want to remember something it usually eludes you.
I'll look into ethernet cables as I'm sure that there's a type that can be used to connect two devices directly without an ethernet hub or switch, but as unusual when you really want to remember something it usually eludes you.