HIKVISION mtd Brick Recovery Guide

Same problem here with Aliexpress Cam:
I transmitted several firmwares, but the only success message comes with EN Firmware. IR comes and goes - so maybe a Bootloop.
Maybe may reseller knows, what to do...
 
Hi

https://www.dropbox.com/s/hcec3kbipbfbteu/digicap.dav?dl=0

I bought camera ds-2cd2032f-iw from aliexpress.

I did upgrade firmware but the camera go to "mini-system 4.0.8"

Now, i have V5.3.0 build 150327 in SADP but i can't connect trough web.
I got "firmware mismatch: /home/webLib"

To the camera i uploaded this firmware (link dropbox)
What to do to get access through the web browser?
Please help me
 

Attachments

  • 20160229_062542.jpg
    20160229_062542.jpg
    481.9 KB · Views: 59
  • 5.3.0.PNG
    5.3.0.PNG
    8.4 KB · Views: 48
  • error404.PNG
    error404.PNG
    50.4 KB · Views: 45
chris85 said:
Hi

https://www.dropbox.com/s/hcec3kbipbfbteu/digicap.dav?dl=0

I bought camera ds-2cd2032f-iw from aliexpress.

I did upgrade firmware but the camera go to "mini-system 4.0.8"

Now, i have V5.3.0 build 150327 in SADP but i can't connect trough web.
I got "firmware mismatch: /home/webLib"

To the camera i uploaded this firmware (link dropbox)
What to do to get access through the web browser?
Please help me
Click to expand...

Same problem after flashing your version. But it was successful and device can be found with SADP...
 
mcrob1083 said:
Same problem after flashing your version. But it was successful and device can be found

This is normal if you flash 5.30 EN to CH camera, that's the point of using the downgrader to get back to 5.25.

Then perform the mtd hack, I made a video to show how this can be done.

Also the downgrader works via the Web update you don't have to tftp it to the camera.
Click to expand...
 
Same problem here with DS-2CD2632F-IS V5.3.0_ 150513 01/2016 labeled camera. Successfully flashed with above firmware and device can be found on SADP (no other firmware will work).
Cannot access on web shown on SADP page but camera can be accessed through ONVIF in Geovision software. Has to do with the encoding channels being 0 on this camera (language mismatch?)

Tried 5.3 to5.25 downgrader after this and is not successful.

Anyone successful loading a firmware lower than V5.3.0 on these?
 

Attachments

  • Capture2.JPG
    Capture2.JPG
    131.6 KB · Views: 42
wdrjack said:
Same problem here with DS-2CD2632F-IS V5.3.0_ 150513 01/2016 labeled camera. Successfully flashed with above firmware and device can be found on SADP (no other firmware will work).
Cannot access on web shown on SADP page but camera can be accessed through ONVIF in Geovision software. Has to do with the encoding channels being 0 on this camera (language mismatch?)

Tried 5.3 to5.25 downgrader after this and is not successful.

Anyone successful loading a firmware lower than V5.3.0 on these?
Click to expand...

Yes, the downgrader does work on these, but only original 1 line version not the 4 line.
 
I've one of this camera bricked
But there is a chance for me for debrick?

Inviato con il mio nokia 3310
 
Always just use the correct firmware, it may possibly be in Chinese but it will be working.
 
how long does it take to update ? my 2332 stays on the tftp line Completed file transmit, and nothing happens after that , tried different firmwares but still no go..

anyone got an ideas ?

SOLVED..redid it with latest fimware now and i go the cameraback online with the window of putting in new password !
 
Last edited by a moderator:
Hi, and thank you for all the advice I could find on your forum.
sorry for my english is the google translation.
I have a DS-2CD3132-IWS manufacture 08/2015 on 5.3 stick is bricker.
The firmware on the SADP is 4.0.8 mini system, before I had managed to downgrade to 5.2.5 in English simply, I did the hack mtd changing the mtd5 and mtd6, and now the camera remains in block 4.0.8
The tftp is impossible to restore in 5.2.5 or 5.3.
You can not telnet, the camera responds to ping 192.168.1.64.

SADP on the serial number is no longer good ==> DS-2CD3132F IWS012015081CCRR536050XXX
can you help me to recover the camera?
 
You won't telnet in on that ip.
Try the correct ip 192.0.0.64
 
SADP, and tftp work completely different but tftp will only ever be on 192.0.0.64
 
I do not understand the TFTP tool does not work on 192.0.0.64 , it starts in 192.168.1.64 but I never have the success message. Do you have a solution? I tried with the 5.3 downgrade with the flag 1 and 2. Thanks in advance I count on your help

 
Try using the web upgrade it works that way as well.
 
the camera is not accessible via the web has firmware 4.0.8 recovery , with special character in the serial number , after having done the hack mtd 5 and 6

 
This is called min-system (recovery mode) It happens when you have made a mistake in not balancing the mtd file after your changes, I would recommened watching the video and trying again.
 
You must log in or register to reply here.
Top Bottom