Hikvision NVR DS-7608N-E2/8P Chinese problem.

jozg

n3wb
Joined
Jul 31, 2015
Messages
3
Reaction score
0
Hello all,

I tried to upgrade my 7608 to a newer digicap.dav 3.4.98 file.
I orgininally bought the device in china, and the seller made it english himself, i guess.

After my upgrade the device won't boot and start beeping.

Then i connected the UART cable to my laptop and try to upgrade the firmware.
That one was only a succes when i upload original chinese firmware, the 3.3.4

I tried to convert an ML digicap file with the hiktools lang 2, and after the upgrade the device again respond to go to the hikvision factory and start beeping again.
Is there a way to make my 7608 english again?

I tried 3.3.4 EN and set it to lang 2, but no succes, send back to factory
I tried the 3.4.98 ML file with lang set to 2, but also send back factory
I tried 3.0.8 but the device won't boot, because it is not downgradeable it says.

So i'm stuck on 3.3.4 chinese, and try to deal with it to use batch configuration, but also that won't work, because the camera's aren't recognised becaus of the language mismatch.

Thank you for helping me out.

regards,
 
Last edited:

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
I tried to convert an ML digicap file with the hiktools lang 2,
Yes, but that only changes the language flag in the header of the firmware file.

Is there a way to make my 7608 english again?
There are at least a couple of methods.

If the device is old enough to have the 'bootpara data' that defines it held in plaintext in the flash partition, this can be edited in the same way that R0 series cameras can be converted to English.
Check out this post, see if you can follow the method.
**ooops** Sorry, forgot the link :

If not -
Another way is to install modified (aka 'hacked to English') firmware.
 
Last edited:
Joined
Jan 5, 2021
Messages
3
Reaction score
1
Location
Astana
[QUOTE = "alastairstevenson, post: 406289, member: 1907"]
Да, но это только меняет флаг языка в заголовке файла прошивки.


Есть как минимум пара способов.

Если устройство достаточно старое, чтобы иметь «данные начальной загрузки», которые определяют его, хранящиеся в открытом виде во флэш-разделе, их можно редактировать так же, как камеры серии R0 могут быть преобразованы в английский язык.
Посмотрите этот пост, посмотрите, сможете ли вы следовать этому методу.
** ooops ** Извините, забыл ссылку:
[URL unwurl = "true"] and-make-it-updatable.37324 / # post-344749 [/ URL]

Если не -
Другой способ - установить модифицированную (она же «взломанную на английский») прошивку.
[/ QUOTE]
Здравствуйте, а если у вас есть взломанная прошивка для сетевого видеорегистратора 7716n-e4 / 16p?
 
Joined
Jan 5, 2021
Messages
3
Reaction score
1
Location
Astana
Здравствуйте, а если у вас есть взломанная прошивка для сетевого видеорегистратора 7716n-e4 / 16p?
 
Top