HikVision Password Reset / Flash new FW via RS232

[alastairstevenson]

I dont get the system upgrade successful. So maybe I have the wrong firmware?

How far does the update get?
Do you get to the 'file transmitted' point?
What status messages show on the tftp updater?

 

[marku2]

admin
adminQGFYCU
Then hit add camera in iVMS in the computer
The firm ware is 5.5.4 for this camera on the Europe web site under the consumer camera section

 

[deanfourie]

Update only gets as far as file transfer complete. I am not receiving the update process complete or whatever it is message. That's what makes me think maybe it wrong firmware.

If I try it in SADP I get device rejected, if I try it in ivms I get incorrect password.

 

[marku2]

Update only gets as far as file transfer complete. I am not receiving the update process complete or whatever it is message. That's what makes me think maybe it wrong firmware.

If I try it in SADP I get device rejected, if I try it in ivms I get incorrect password.

Can you hit the rest button and see what it goes back to

 

[hotair1983]

Oprogramowanie sprzętowe IPCTC_HL_E6_EN_STD_5.5.803_210817.zip

 

[v-milenin]

Maybe the file, that you are sending to camera is bigger than 32mb, if so, you shoud use 64bit TFTP version.
Some time ago i used usb-uart to firmware the cam, and it was pretty easy. The cam accepts any kind of firmware, but it can't boot properly with wrong firmware.
Also with usb-uart you can see all mesages during upgrade process on the screen.
Also using usb-uart you can change the default TFTP address in camera to make the upgrade process more convinient.

 

[trempa92]

It should go to inactive state or to default password that is admin+vercode(withoutplus)