Hi All,
I'm hoping someone can shed some light on an issue I've encountered with my setup.
I have a DS-2CD2042WD-I linked to my NAS running Surveillance Station 7.1.
Over the past few weeks I've been recording via Motion Detection at the camera end which has worked OK but did provide a few false alerts.
With this in mind I've done some research and found that Intrusion Detection is the way forward (mainly because you can set a time threshold).
I've set it all up as expected but cannot for the life of me get Surveillance Station to record as expected, I've even made all settings as sensitive as can be without any luck.
Am I missing something here? Is this a known issue?
Any help is greatly, I hope it will work as I have two new Hik's on the way!
Thanks.
I'm hoping someone can shed some light on an issue I've encountered with my setup.
I have a DS-2CD2042WD-I linked to my NAS running Surveillance Station 7.1.
Over the past few weeks I've been recording via Motion Detection at the camera end which has worked OK but did provide a few false alerts.
With this in mind I've done some research and found that Intrusion Detection is the way forward (mainly because you can set a time threshold).
I've set it all up as expected but cannot for the life of me get Surveillance Station to record as expected, I've even made all settings as sensitive as can be without any luck.
Am I missing something here? Is this a known issue?
Any help is greatly, I hope it will work as I have two new Hik's on the way!
Thanks.