How to configure my NVR to door bell system?

[akuma69]

Hello everyone. I want to be able to see my cameras from my doorbell monitor.

I have the following devices:

• 3 doorbell devices. 2 are display monitors. 1 is the doorbell camera.
• dahua NVR5216-16P-I/L. And 8 dahua cameras connected to it.
• All devices are connected to central router with fixes IP addresses.

My doorbell monitor is this one. see below.











On the IPC monitor i can add IPC, see below.





I am not sure what details i should put here to be able to access my IP cameras





I would think its the IP address of the dahua NVR? I tried that and it doesn't work.

From the Dahua NVR, i do see all 3 doorbell devices. So the connection is good.

But i dont know how to see my NVR cameras from my doorbell monitor devices.
Anyone been able to get these to work? I'm sure I might just be doing incorrect settings.

Thanks guys

 

[Mark_M]

I do not have a screen with my same NVR, but this is what I have seen online:


So on your VTH I think you need to change from 'IPC' to 'NVR' and then the channel.
Channel number maybe from 0-15 instead of 1-16, some products work from 0 upwards for counting the channels.

 

[akuma69]

I do not have a screen with my same NVR, but this is what I have seen online:


So on your VTH I think you need to change from 'IPC' to 'NVR' and then the channel.
Channel number maybe from 0-15 instead of 1-16, some products work from 0 upwards for counting the channels.
View attachment 147873

thanks for reply mate. Which channel do I choose? which protocol?

 

[Mark_M]

Which channel do I choose? which protocol?

What ever channel your other 8 camera's are connected to. Same channel as the NVR sees it.
Channel is the same port you plugged the camera into the back of the NVR.

Which protocol?

I presume it would be local.

It looks like you need to add each camera individually.

 

[akuma69]

What ever channel your other 8 camera's are connected to. Same channel as the NVR sees it.
Channel is the same port you plugged the camera into the back of the NVR.


I presume it would be local.

It looks like you need to add each camera individually.

ahhh so the IP address is camera IP not NVR IP?

 

[Mark_M]

ahhh so the IP address is camera IP not NVR IP?

NVR IP address, select the channel number and the button to 'NVR'.
Just as that video on Youtube does.

 

[akuma69]

thanks so much Mark!!! i feel like crying happy tears! been banging my head trying to get it to work!