how to use different triggers based on different zones..

myipcam

Getting the hang of it
Joined
Dec 23, 2018
Messages
132
Reaction score
33
Location
USA
Experimenting with MQTT and trying to automate things. Right now, one zone covers the entire FOV and in case of motion, trigger MQTT... this part works fine. Now, I would like to use a second zone and send a different topic to turn on say, exterior lights when motion on the driveway is detected. I looked through profiles... seems like it could be done but would require switching profiles. But that would mean that the first zone covering everything won't trigger. I am probably having a brain freeze and can't seem to figure it out...

Any ideas on how to accomplish this?

Thanks!
 

myipcam

Getting the hang of it
Joined
Dec 23, 2018
Messages
132
Reaction score
33
Location
USA
Try cloning your cam and set it up for the second zone.
Interesting idea. This could work and probably turn off recording etc., ... currently away from the system, will try and see if it allows adding the Alert function without recording... it should in theory...
thank you!
 

handinpalm

Getting comfortable
Joined
Sep 21, 2016
Messages
679
Reaction score
1,432
Location
Tampa Bay FL
Yes, just disable the recording on the cloned camera and setup alerts as you wish, as long as you record 24/7 on the original. I have many of my cameras setup like this. Use different profiles for how you want the system to react. Good stuff.
 
Top