How to use this particular RTSP URL?

[ee21]

Got a new color night vision camera from LOREX.com, unfortunately although LOREX is listed in BI, this particular model LNE4322 is not. I tried the other camera models pre-made configs, but they did not work. After some googleing, I found an MJPG strem URL that worked, /axis-cgi/mjpg/video.cgi?camera=[CHANNEL]
But that returned a poor quality low-fps stream. After over an hour on the line with tier 2 support, I was provided this information:

To access RTSP Third Party Streaming:

1. Using your third party software, enter the RTSP address (default: rtsp://: : @ :/cam/realmonitor?channel=&subtype=).

I am assuming : : @ : is supposed to be (at least partially) replaced with the IP address, but so far I am not having any luck getting any variation of that to work. Any suggestions appreciated. (please note the spaces in : : @ : are intentional, HTML turns part of that into a similey otherwise)

 

[zero-degrees]

Got a new color night vision camera from LOREX.com, unfortunately although LOREX is listed in BI, this particular model LNE4322 is not. I tried the other camera models pre-made configs, but they did not work. After some googleing, I found an MJPG strem URL that worked, /axis-cgi/mjpg/video.cgi?camera=[CHANNEL]
But that returned a poor quality low-fps stream. After over an hour on the line with tier 2 support, I was provided this information:

To access RTSP Third Party Streaming:

1. Using your third party software, enter the RTSP address (default: rtsp://: : @ :/cam/realmonitor?channel=&subtype=).

I am assuming : : @ : is supposed to be (at least partially) replaced with the IP address, but so far I am not having any luck getting any variation of that to work. Any suggestions appreciated. (please note the spaces in : : @ : are intentional, HTML turns part of that into a similey otherwise)

I could be wrong but I think you have a few to many ":" I believe the conversion for Lorex is // username : password @ ipaddress /blahblahblah

However, also take note Lorex has been discussed in a few threads here and RTSP support always seems to be "missing" or people are "unsure" of it's compatibility. The only thing I see referenced in other threads is jpg support and some note "RTSP" does not show available in ONVIF Device Manager or other IP/Scanning applications.

 

[fenderman]

Got a new color night vision camera from LOREX.com, unfortunately although LOREX is listed in BI, this particular model LNE4322 is not. I tried the other camera models pre-made configs, but they did not work. After some googleing, I found an MJPG strem URL that worked, /axis-cgi/mjpg/video.cgi?camera=[CHANNEL]
But that returned a poor quality low-fps stream. After over an hour on the line with tier 2 support, I was provided this information:

To access RTSP Third Party Streaming:

1. Using your third party software, enter the RTSP address (default: rtsp://: : @ :/cam/realmonitor?channel=&subtype=).

I am assuming : : @ : is supposed to be (at least partially) replaced with the IP address, but so far I am not having any luck getting any variation of that to work. Any suggestions appreciated. (please note the spaces in : : @ : are intentional, HTML turns part of that into a similey otherwise)

try dahua rtsp...if it doesnt work you likely have something else wrong. or use find inspect

 

[ee21]

I could be wrong but I think you have a few to many ":" I believe the conversion for Lorex is // username : password @ ipaddress /blahblahblah

However, also take note Lorex has been discussed in a few threads here and RTSP support always seems to be "missing" or people are "unsure" of it's compatibility. The only thing I see referenced in other threads is jpg support and some note "RTSP" does not show available in ONVIF Device Manager or other IP/Scanning applications.

That is an exact quote from a website instructional document their tier 2 support linked me to. It looked suspiciously like it had too many ":" to me too though. I tried //admin:MYPASSWORD@192.168.0.18/cam/realmonitor?channel=&subtype=
Which did not work unfortunately.

 

[ee21]

try dahua rtsp...if it doesnt work you likely have something else wrong. or use find inspect

Tried all thee of the Dahua pre-configs, none worked. When I do inspect, this is what is returned:

Opening port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2000-01-03T20:33:13.000Z
Requesting device information...
Bad response
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
Has Event services: /onvif/event_service
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 0
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

But when its done, the path is left blank, and is set to Generic, RTSP.

 

[fenderman]

Tried all thee of the Dahua pre-configs, none worked. When I do inspect, this is what is returned:

Opening port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2000-01-03T20:33:13.000Z
Requesting device information...
Bad response
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
Has Event services: /onvif/event_service
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 0
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

But when its done, the path is left blank, and is set to Generic, RTSP.

you have something set incorrectly, port, ip, user, password...