I think I Bricked it?

[msp116]

Pretty sure I bricked my Dahua PTZ trying to upgrade firmware....can anybody point me in the direction of a dummy guide on how to fix this?

 

[EMPIRETECANDY]

Now the camera can't access from webpage? Still can ping the IP? Can try to make a hard reset and test again.

If camera can be powered and can't access from webpage, camera bricked. Need ftp to do serieal port flash to bring the camera back

 

[msp116]

Now the camera can't access from webpage? Still can ping the IP? Can try to make a hard reset and test again.

If camera can be powered and can't access from webpage, camera bricked. Need ftp to do serieal port flash to bring the camera back

Yes the camera powers on, but no I CANNOT access the web interface. It tries to communicate with the switch then after about 5-10 sec it goes out and starts all over again. How or where would I communicate with it over a serial connection?

 

[EMPIRETECANDY]

C

Thread 'Dahua IPC EASY unbricking / recovery over TFTP'

Feb 22, 2017

A successor of Dahua IPC unbricking / recovery over serial UART and TFTP
I recommend you to read through the above thread first.

If your camera still has a working bootloader (assume it does) then you can flash it easily, because:
The camera tries to download a file called "upgrade_info_7db780a713a4.txt" from a TFTP server running on 192.168.254.254 and executes the commands in said file in the bootloader (U-Boot) shell.
For more in-depth information, read this post: Dahua Firmware Mod Kit + Modded Dahua Firmware

Step 1, Configuring the network correctly.
The cameras IP...

• cor35vet
• Replies: 535
• Forum: Dahua

• 
• 

Just refer to this link.

 

[msp116]

C

Thread 'Dahua IPC EASY unbricking / recovery over TFTP'

Feb 22, 2017

A successor of Dahua IPC unbricking / recovery over serial UART and TFTP
I recommend you to read through the above thread first.

If your camera still has a working bootloader (assume it does) then you can flash it easily, because:
The camera tries to download a file called "upgrade_info_7db780a713a4.txt" from a TFTP server running on 192.168.254.254 and executes the commands in said file in the bootloader (U-Boot) shell.
For more in-depth information, read this post: Dahua Firmware Mod Kit + Modded Dahua Firmware

Step 1, Configuring the network correctly.
The cameras IP...

• cor35vet
• Replies: 535
• Forum: Dahua

• 
• 

Just refer to this link.

I really appreciate....can you confirm what is the latest working firmware for this?I didn't realize I tried to upload a US version firmware...