Intermittent beeping on my Hikvision DS 7604NI-KI/4P

[ChilliDawg]

Hi all, hope somebody can help.

We had a Hikvision DS 7604NI-KI/4P installed by a CCTV company about 18 months ago and it has been working absolutely fine up until now.

Today we have got up and have intermittent beeping coming from it.

We have done quite a lot of googling trying to help us sort this out but to no avail. When the system was installed, we do not know what the password was, so we are having an issue trying to login into the web browser page using the IP address.

Is there a different way of finding out what the issue is and getting it sorted without logging into the web browser page? We have the 'iVMS Client' on our PC's and the Hikvision apps on our phones.

 

[TonyR]

Possibly a failing hard drive or network issue (IP conflict or attempted access).
What is the pattern of the beeps?

Will the installing co. provide you with the password? If you paid them to install it then it's yours and they should provide you with the username and password.

 

[ChilliDawg]

Possibly a failing hard drive or network issue (IP conflict or attempted access).
What is the pattern of the beeps?

Will the installing co. provide you with the password? if not I'd tell them to come get the #$@% thing....if you paid them to install it then it's yours and they should provide you with the username and password.

The pattern of the beeps is as follows: beep, beep, beep, beep. Four beeps in rapid succession, evenly spaced apart.

 

[ChilliDawg]

Possibly a failing hard drive or network issue (IP conflict or attempted access).
What is the pattern of the beeps?

Will the installing co. provide you with the password? If you paid them to install it then it's yours and they should provide you with the username and password.

Also, about 1 minute apart from each sequence of beeps.

 

[TonyR]

There may be info on the errors causing the beeping to be found in the logs located under "maintenance" => "log" => "exception" but you need to be able to log in to the NVR.

 

[ChilliDawg]

There may be info on the errors causing the beeping to be found in the logs located under "maintenance" => "log" => "exception" but you need to be able to log in to the NVR.

That's why we have been trying to log into it. I will try to give the installation company a call tomorrow to see if they can help with the password.