Internet Explorer Time Out

[Chris J LaBoda]

Anyway to prevent Internet Explorer from timing out?

Using Windows 10 and a Dahua NVR5216-16P-4KSE2.

 

[c hris527]

If you are logged into your NVR with IE, It might be the opposite issue, Your NVR should have a auto log out setting, try setting it to zero. That should keep it connected. If this is not the issue, more info about your setup and network would be helpful.

 

[WA3PNT]

My "Auto Logout" is set to 0, and I still have to log back in after an extended period.
The data (videos, etc.) continues to appear until I try to change something. Then I have to log back in.

RodeoGeorge

 

[c hris527]

My "Auto Logout" is set to 0, and I still have to log back in after an extended period.
The data (videos, etc.) continues to appear until I try to change something. Then I have to log back in.

RodeoGeorge

So the "Viewing" stays running but if you need to make a change it will require you to log back in to make any administrative change?

 

[Chris J LaBoda]

I will give that a try.
Thanks

 

[Chris J LaBoda]

So the "Viewing" stays running but if you need to make a change it will require you to log back in to make any administrative change?

Yes correct.

 

[Chris J LaBoda]

Still timing out after setting Auto Logout to 0.

 

[c hris527]

Still timing out after setting Auto Logout to 0.
[/QUOTE
Can you post a pic of the screen shot of the time out error, AND have you tried running SmartPss and see if it times out through that.

 

[c hris527]

The auto logout feature might not work through IE and just work on your NVR directly, not sure, I have a older NVR and it works fine but its a security issue through IE and Dahua may have done this by design. Other here have reported it works and a few not, could be different firmware versions.

 

[Chris J LaBoda]

Here is a screen cap.