IPC-HDBW4231F-E2-M

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
upgrade took fine on my 2231. Seems to have cleared up my issue using the plugin on IE and I can now manage the cam properly with IE.
(previously, it kep saying I didn't have the plugin the installed, despite having done so quite a few times.)

that said, the missing 'backlight' controls for the channel 2 eyeball are still missing...
 

Mel Patto

Getting comfortable
Joined
Mar 8, 2016
Messages
27
Reaction score
2
Location
Syosset, New York
Has anyone been able to get the firmware to work. I’m getting the same error as Roger on my IPC-HDBW4231F-E2-M . Any chance that the serial # on the camera label does not match the serial # in the camera setup can have anything to do with It?
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,717
Location
HONGKONG
Has anyone been able to get the firmware to work. I’m getting the same error as Roger on my IPC-HDBW4231F-E2-M . Any chance that the serial # on the camera label does not match the serial # in the camera setup can have anything to do with It?
I will make a testing here for this newer FW, will ask for if any new updates.
 

giomania

IPCT Contributor
Joined
Jun 1, 2017
Messages
780
Reaction score
538
The file names are identical to the firmware's here: Latest New 20180813 Firmware for DH_IPC-HX5X3X-Rhea
The PAL file size is different, NTSC's looks the same.
I don't know anything about this camera, just an observation. Seems odd.
The difference is the word "Multi" (for multiple lenses) in the firmware for this camera. Do I win a free camera for figuring this out?

DH_IPC-HX5X3X-Multi-Rhea_Eng_P_V2.622.0000000.31.R.180813(1)
DH_IPC-HX5X3X-Rhea_Eng_P_Stream3_V2.622.0000000.31.R.180813

DH_IPC-HX5X3X-Multi-Rhea_EngSpnFrn_N_V2.622.0000000.31.R.180813
DH_IPC-HX5X3X-Rhea_EngSpnFrn_N_Stream3_V2.622.0000000.31.R.180813
 
Joined
Apr 26, 2016
Messages
1,090
Reaction score
852
Location
Colorado
@looney2ns when you updated the firmware did it blow out all your network settings or keep them? I ask because I wanted to upgrade but since the camera is remote if it wipes the network config then they are broke until I get back to that site.
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
@looney2ns when you updated the firmware did it blow out all your network settings or keep them? I ask because I wanted to upgrade but since the camera is remote if it wipes the network config then they are broke until I get back to that site.
No it didn't, but I also have not found any real changes from one firmware to the next. It is always best practice to set the camera back to factory defaults after updating. So in your situation, Unless your are having issue's with the cam, I wouldn't update while offsite.
 
Top