IPC-T2231T-ZS IPC-HX2XXX-Molec_MultiLang_PN_V2.800.0000000.19.R.200628

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
Thanks for reporting to us, will release more firmware to update here soon . Logo and no logo both can be downloaded now.
 

htfan

n3wb
Joined
Nov 26, 2019
Messages
15
Reaction score
6
Location
US
I had the same problem, try contacting him with a Direct Message or @ his username
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
Will post the 2431T firmware soon.
Dahua has some mistakes, they use 2 different files for differnt lots, so the IPC-T2431T-AS firmware has earlier version and latest new version.
I will make a new thread very soon.
 
Last edited:

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
I just purchased the camera (Loryta IPC-T2431T-AS 3.6mm) from Andy's store on Amazon, and I can't upgrade.
Is the firmware listed in the word file at the top of this thread the correct one?
Update here, can go to check and make a flashing.
 
Joined
May 20, 2017
Messages
4
Reaction score
0
Even today Amazon is selling the old version of the camera: I purchased a number of them from Amazon in the last 2 weeks and I had to load the firmware from the 2019 batches
 

Scott Ritchey

Getting the hang of it
Joined
Jul 31, 2019
Messages
40
Reaction score
34
Location
Kittrell, NC
Andy: What is status of firmware update for HDW2231T-ZS-S2? Word doc in top post doesn't open. Is it a bad link or is a different update pending?

I have a IPC-HDW2231T-ZS-S2 that works OK except Blue Iris image goes bizarre (see below) at random periods: jpg snapshot much bigger (500K-900K) than normal (200K).

When I check it, image looks OK on NVR and web browser. Do I need a firmware update or is this a Blue Iris issue?

HDW2231T-ZS.20200522_021514941.jpg
 

Scott Ritchey

Getting the hang of it
Joined
Jul 31, 2019
Messages
40
Reaction score
34
Location
Kittrell, NC
Update: I think my intermittent IPC-HDW2231T-ZS-S2 image problem was fixed by the latest Blue Iris update (Release 5.2.9.14 x64 (6/9/2020)). It's hard to be sure with intermittent problems but images have been normal for three days.
 

jstrom

n3wb
Joined
Jul 19, 2015
Messages
12
Reaction score
3
Updated my 2231T-ZS-S2 with V2.800.0000000.19.R, Build Date: 2020-06-28 today, now I cannot adjust Zoom and focus (well, actually the controls to adjust works, so viewing the video under Live or similar is a workaround)

In both Firefox and Chrome, the video is blank and in the Developer Console, there is a Javascript error:

Code:
Uncaught ReferenceError: channel is not defined
    at d.render (cameraNewConfig.js:4)
    at d.init (cameraNewConfig.js:4)
    at d.c.exports (pageBase.js:1)
    at new d (pageBase.js:1)
    at pageTab.js:1
    at t.e.callback (sea.js?version=@WebVersion@:1)
    at t.onload (sea.js?version=@WebVersion@:1)
    at t.load (sea.js?version=@WebVersion@:1)
    at Function.t.use (sea.js?version=@WebVersion@:1)
    at Function.require.async (sea.js?version=@WebVersion@:1)
 

LopezEL

Getting the hang of it
Joined
Sep 30, 2019
Messages
65
Reaction score
44
Location
SC
Question- is the zoom & focus tab still working for everyone on this new firmware? I upgraded my IPC-2231T-ZS to the linked firmware and now the zoom and focus tab is not responding at all. Can't view the camera feed nor change the zoom values. Any ideas? I tried on chrome, IE, and edge. None worked.

I'm also having the same issue with my IPC-HDW5231R-ZE that I updated with firmware from Andy's other link here: New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807
 

Attachments

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
Get it, so you have 2 different FW version for this model right?
DH_IPC-HX2XXX-Molec_MultiLang_PN-CustomPro_name_V2.800.10LZ000.0.R.200628.zip

This is the latest new one, there is no further update.
 
Joined
May 20, 2017
Messages
4
Reaction score
0
Get it, so you have 2 different FW version for this model right?
DH_IPC-HX2XXX-Molec_MultiLang_PN-CustomPro_name_V2.800.10LZ000.0.R.200628.zip
This is the latest new one, there is no further update.
This firmware works on some of the cameras, but not on others. All cameras are Loryta IPC-T2431T-AS that I bought through your store on Amazon. Thus I will need the updated version of the "old" firmware (so confusing, same model number, but different firmware as they were 2019 production batches.)
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
This firmware works on some of the cameras, but not on others. All cameras are Loryta IPC-T2431T-AS that I bought through your store on Amazon. Thus I will need the updated version of the "old" firmware (so confusing, same model number, but different firmware as they were 2019 production batches.)
Added, can download from 1st page.
 

Shockwave199

Getting comfortable
Joined
Mar 13, 2014
Messages
993
Reaction score
505
Location
New York
Does anyone know what this firmware adds or fixes? I'm inclined not to update because I don't have anything particularly wrong with the cameras. But what does this firmware address?
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,239
Reaction score
8,716
Location
HONGKONG
Latest new firmware has been released.
 

mvcl

n3wb
Joined
Sep 29, 2020
Messages
1
Reaction score
0
Location
Berkeley, California, USA
Has anyone experienced any issues with this firmware?

I can't login to the camera on chrome, - it just sits on the username password screen (it does fail if the password is wrong).
- Interestingly I can login using Safari but the interface seems bogged down and super slow.

I've tried resetting the camera (IPC-HDW2231T-ZS-S2) - didn't help.

Is there newer firmware or am I able to go back to the older firmware? if so how?
Did you try going to the left of the URL and clicking next to the padlock icon? Check to see if Chrome is enabling FLASH in the page. I have much better results when I do enable it for the IPC-HDW2831T-ZS-S2 camera's management UI.
 
Top