IPC-T2231T-ZS IPC-T2431T-AS 2022 IPC-HX2XXX-Molec_MultiLang_PN_V2.820.0000000.48.R.220614.bin

Thanks for reporting to us, will release more firmware to update here soon . Logo and no logo both can be downloaded now.
 
I just purchased the camera (Loryta IPC-T2431T-AS 3.6mm) from Andy's store on Amazon, and I can't upgrade.
Is the firmware listed in the word file at the top of this thread the correct one?
 

Attachments

  • Screen Shot.jpg
    Screen Shot.jpg
    447.1 KB · Views: 31
Will post the 2431T firmware soon.
Dahua has some mistakes, they use 2 different files for differnt lots, so the IPC-T2431T-AS firmware has earlier version and latest new version.
I will make a new thread very soon.
 
Last edited:
  • Like
Reactions: htfan
Enrico Dallavecchia said:
I just purchased the camera (Loryta IPC-T2431T-AS 3.6mm) from Andy's store on Amazon, and I can't upgrade.
Is the firmware listed in the word file at the top of this thread the correct one?
Click to expand...

IPC-T2431T-AS Firmware issue

Hey guys Dahua use 2 different firmware for differnt batches , so the IPC-T2431T-AS firmware has earlier version and latest new version. The stocks in 2019 and early 2020, use this one...
ipcamtalk.com ipcamtalk.com
Update here, can go to check and make a flashing.
 
  • Like
Reactions: htfan
Even today Amazon is selling the old version of the camera: I purchased a number of them from Amazon in the last 2 weeks and I had to load the firmware from the 2019 batches
 
Enrico Dallavecchia said:
Even today Amazon is selling the old version of the camera: I purchased a number of them from Amazon in the last 2 weeks and I had to load the firmware from the 2019 batches
Click to expand...
Correct, that is not be a problem, both 2 firmware still can be updated. :)
 
Andy: What is status of firmware update for HDW2231T-ZS-S2? Word doc in top post doesn't open. Is it a bad link or is a different update pending?

I have a IPC-HDW2231T-ZS-S2 that works OK except Blue Iris image goes bizarre (see below) at random periods: jpg snapshot much bigger (500K-900K) than normal (200K).

When I check it, image looks OK on NVR and web browser. Do I need a firmware update or is this a Blue Iris issue?

HDW2231T-ZS.20200522_021514941.jpg
 
Update: I think my intermittent IPC-HDW2231T-ZS-S2 image problem was fixed by the latest Blue Iris update (Release 5.2.9.14 x64 (6/9/2020)). It's hard to be sure with intermittent problems but images have been normal for three days.
 
Just update the latest new firmware on this link, guys go to download and update!
 
  • Like
Reactions: Warptrooper
Updated my 2231T-ZS-S2 with V2.800.0000000.19.R, Build Date: 2020-06-28 today, now I cannot adjust Zoom and focus (well, actually the controls to adjust works, so viewing the video under Live or similar is a workaround)

In both Firefox and Chrome, the video is blank and in the Developer Console, there is a Javascript error:

Code: 
Uncaught ReferenceError: channel is not defined
    at d.render (cameraNewConfig.js:4)
    at d.init (cameraNewConfig.js:4)
    at d.c.exports (pageBase.js:1)
    at new d (pageBase.js:1)
    at pageTab.js:1
    at t.e.callback (sea.js?version=@WebVersion@:1)
    at t.onload (sea.js?version=@WebVersion@:1)
    at t.load (sea.js?version=@WebVersion@:1)
    at Function.t.use (sea.js?version=@WebVersion@:1)
    at Function.require.async (sea.js?version=@WebVersion@:1)
 
Question- is the zoom & focus tab still working for everyone on this new firmware? I upgraded my IPC-2231T-ZS to the linked firmware and now the zoom and focus tab is not responding at all. Can't view the camera feed nor change the zoom values. Any ideas? I tried on chrome, IE, and edge. None worked.

I'm also having the same issue with my IPC-HDW5231R-ZE that I updated with firmware from Andy's other link here: New Firmware for IPC-HX5X3X-Rhea_Eng_NP_Stream3_V2.800.20190807
 

Attachments

  • 2231.PNG
    2231.PNG
    20.5 KB · Views: 16
  • Capture.PNG
    Capture.PNG
    25.3 KB · Views: 16
Get it, so you have 2 different FW version for this model right?
DH_IPC-HX2XXX-Molec_MultiLang_PN-CustomPro_name_V2.800.10LZ000.0.R.200628.zip

This is the latest new one, there is no further update.
 
EMPIRETECANDY said:
Get it, so you have 2 different FW version for this model right?
DH_IPC-HX2XXX-Molec_MultiLang_PN-CustomPro_name_V2.800.10LZ000.0.R.200628.zip
This is the latest new one, there is no further update.
Click to expand...
This firmware works on some of the cameras, but not on others. All cameras are Loryta IPC-T2431T-AS that I bought through your store on Amazon. Thus I will need the updated version of the "old" firmware (so confusing, same model number, but different firmware as they were 2019 production batches.)
 
Enrico Dallavecchia said:
This firmware works on some of the cameras, but not on others. All cameras are Loryta IPC-T2431T-AS that I bought through your store on Amazon. Thus I will need the updated version of the "old" firmware (so confusing, same model number, but different firmware as they were 2019 production batches.)
Click to expand...
Added, can download from 1st page.
 
  • Like
Reactions: Henry72
Does anyone know what this firmware adds or fixes? I'm inclined not to update because I don't have anything particularly wrong with the cameras. But what does this firmware address?
 
Joyc0025 said:
Has anyone experienced any issues with this firmware?

I can't login to the camera on chrome, - it just sits on the username password screen (it does fail if the password is wrong).
- Interestingly I can login using Safari but the interface seems bogged down and super slow.

I've tried resetting the camera (IPC-HDW2231T-ZS-S2) - didn't help.

Is there newer firmware or am I able to go back to the older firmware? if so how?
Click to expand...
Did you try going to the left of the URL and clicking next to the padlock icon? Check to see if Chrome is enabling FLASH in the page. I have much better results when I do enable it for the IPC-HDW2831T-ZS-S2 camera's management UI.
 
You must log in or register to reply here.
Top Bottom