MikeLud1
IPCT Contributor
IPC-T5442T-ZE IPC-T5442TM-AS IPC-T5842T-ZE SMD 3.0 Smart IR Latest New Firmware From EmpireTech
- Thread starter EMPIRETECANDY
- Start date
Will not update to the newer web interface, just some function upgrade.
what is the new web interface mentioned? would it mean a move beyond IE? If not then I do not suppose I am excited
Currently firmware will support chorme and edge well, the one Mike talked is a new GUI. Function no difference.
yeah, edge works OK. But IE is better with the plugin and live viewing on main stream. Thanks!
I just picked up a IPC-T5442TM-AS and a IPC-T5442T-ZE. I upgraded the TM-AS without issues to this firmware, however after I upgraded the T-ZE, it doesn't appear to have any connectivity. Is there anything I can do, or do I have to return the camera?
Hey guys
This firmware eventually released, but without Smart IR, any guy want to test just send me a DM, will add later when fully tested.
IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.840.0000000.18.R.220629
This firmware eventually released, but without Smart IR, any guy want to test just send me a DM, will add later when fully tested.
IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.840.0000000.18.R.220629
So we have Off, Auto and Manual IR setting... just not Smart IR? Is this firmware for security updates, new features or both? How is it different from V2.840.15OG008.0.R, Build Date: 2022-02-18? Thanks Andy!
Not too much details.
This version fixes some bug, improves the product performance,and strengthens product security on the basis of the version.
Platform Information:
1.CGI testing tool version: V2.91.1.1
2.ONVIF testing tool version: V20.12
3.ONVIF: Supports ProfileG, ProfileT, ProfileS
NorthBendDave
Pulling my weight
I have a new 5442TM-as. Cannot get the FW file to install. I am using IE, I did install this FW to 4 other 5224's several months ago with no problem. All I get is the progress bar, and it says downloading file. And it never changes. Thoughts?
As an Amazon Associate IPCamTalk earns from qualifying purchases.
looney2ns
IPCT Contributor
Have you rebooted the camera prior to the install?
Have you set the cam back to factory defaults prior to updating firmware?
Sounds browser related. Close browser. Uninstall webrec folder in programfilesx86 and programfiles if located there too.
Rebrowse to camera. Install plugin on live view screen.
Try update.
I would try chrome if IE does not work.
Also what firmware build date is it currently on?
NorthBendDave
Pulling my weight
Current FW is 2020-12-03
Yes, I rebooted the camera, Factory defaulted it, and turned off recording (i got that warning a while ago)
I did delete that directory in both places
Still won't load
This is one of the refurbs from Andy
NorthBendDave
Pulling my weight
looney2ns
IPCT Contributor
It appears you are accessing that camera through the NVR based on the port at the end of the IP address, correct?
Have you tried updating directly through the cams interface.
Have you tried resetting to defaults 3 times in a row?
Just a shot in the dark.
NorthBendDave
Pulling my weight
Try logging in to the NVR in “InPrivate” with Internet Explorer. Then the camera as stated.
Open IE, Ctrl-Shift-P, then log into NVR
Open IE, Ctrl-Shift-P, then log into NVR