Guys please help
Ok I've set up numerous huisuns on my own network ordered a v2 for my sister and for the life of me can't get the ptz to work with the hikvision Nvr. She has a 4channel nvr with a switch adding a further 4 cameras. Her existing cameras have their IPv4 set to 0.0.0.0? So her system is
Router ip 10.0.0.138
Nvr ip 10.0.0.64
Internal Nic IPv4 192.0.0.1
Cameras plugged into nvrs addresses are 192.0.0.**
Into the switch their
10.0.0.**
But the sadp tool picked up that the cameras IPv4 are 0.0.0.0 why? I set the new ptz to ip 192.0.0.32 and IPv4 to 192.0.0.1 and plugged into nvr but it won't work!!!! Do I have to set the IPv4 to 0.0.0.0? How do i do that as the sadp tool won't allow it.....arrrgghhh so frustrated
Ok I've set up numerous huisuns on my own network ordered a v2 for my sister and for the life of me can't get the ptz to work with the hikvision Nvr. She has a 4channel nvr with a switch adding a further 4 cameras. Her existing cameras have their IPv4 set to 0.0.0.0? So her system is
Router ip 10.0.0.138
Nvr ip 10.0.0.64
Internal Nic IPv4 192.0.0.1
Cameras plugged into nvrs addresses are 192.0.0.**
Into the switch their
10.0.0.**
But the sadp tool picked up that the cameras IPv4 are 0.0.0.0 why? I set the new ptz to ip 192.0.0.32 and IPv4 to 192.0.0.1 and plugged into nvr but it won't work!!!! Do I have to set the IPv4 to 0.0.0.0? How do i do that as the sadp tool won't allow it.....arrrgghhh so frustrated