I was doing it through the NVR but I tried direct access and the only one I could connect to that way was the one out in the shop. That one is connected to my router through a switch. All of the others that are connected directly to the NVR sayAre you accessing the cameras setting through a DVR or directly through the cameras IP address and it's own config screen. To me it looks like you're in the DVR's cam settings - which is limited. You need to directly access the camera via it's IP address to get the full options.
This site can’t be reached
took too long to respond.
The one that I accessed by IP address did appear to have a little more info but the actual settings seemed to have the same options. Correction: I may have found some additional settings as well. Thanks.
Last edited: