Is there a ceiling mount like PFB300C that is compatible with the PFA137?
Dahua Technology PFB300C Ceiling Mount Bracket #DAPFB300C
Dahua Technology PFB300C Ceiling Mount Bracket #DAPFB300C
I am playing around with framing my picture and FOV. It seems the best install point is about 1.5 feet below the ceiling. Wiring through the ceiling is far easier than the vertical wall. I was thinking of using a ceiling mount to bridge that 1.5 foot gap and not have to fight through the wall into the ceiling.Why would you use a PFA137 when using a ceiling mount? Very unusual use scenario.
The camera I am trying to mount above the door is the IPC-HDW5231R-Z. I believe this is the appropriate mount for it no?That sounds sensible but why the PFA137?
I have actually. That is my current plan, but wanted to see if there were other options and figured a ceiling mount + a junction box would work too.Can understand your aversion to running cable through the wall.
Have you considered using a PFB203W and running a conduit up the wall to the ceiling?
I reckon that would look neater.
A bit of a Frankenstein solution if you ask me.I have actually. That is my current plan, but wanted to see if there were other options and figured a ceiling mount + a junction box would work too.
I have seen some ceiling mount solutions that look really nice. Either way if I have the wire from the ceiling outside of the wall, then I will have a bit of an eyesore. I absolutely want this to look nice which is why I am looking at other options. I have a PFB203W in hand and have been looking at it aesthetically and found it wanting. This is especially true since it would be attaching to a stone face. I believe I would have to paint the mount and the camera shell to be stone coloured to match a little better. I would also need to cover the exposed cable with a cable concealer kit (something like this) and paint it the same colour.A bit of a Frankenstein solution if you ask me.
At $170 are these really cheap cameras? I know cameras go into the hundreds and > $1000, but those seems to be specialty cameras more than main stream ones.IPC-HDW5231R-Z are cheap cameras and probably don't warrant manufacturing a decent looking ceiling mount.
Maybe I missed a suggestion here. What did you have in mind with a "conduit"?Can understand your aversion to running cable through the wall.
Have you considered using a PFB203W and running a conduit up the wall to the ceiling?
I reckon that would look neater.